Products

BONDERITE® S-FN 109B is one of a series of coatings designed to provide controlled electrical properties. BONDERITE® S-FN 109B is a dispersion of finely divided graphite in a thermoplastic resin. This product rapidly air dries to form a flexible conductive coating. It is designed to be applied by typical spray or printing techniques. The flexibility of this product makes it an excellent choice for coating plastic as well as metal. BONDERITE® S-FN 109B is tested for 11 elemental impurities. The high purity level of BONDERITE® S-FN 109B makes for a highly conductive, flexible coating.

HP9891-TOFA Short Oil Alkyd is a short oil, chain-stopped alkyd resin based on Tall Oil Fatty Acid for air-dry spray paints and baking enamels. It exhibits good overbake resistance

BONDERITE® S-FN 213 ACHESON is designed to provide controlled electrical resistance properties. BONDERITE® S-FN 213 ACHESON is a dispersion of finely divided graphite pigment in an epoxy resin solution. When properly cured, it has excellent adhesion to epoxy circuit boards, bushings, plastics and ceramics. BONDERITE® S-FN 213 ACHESON also has excellent wearing properties. It provides chemical resistance to oils and many solvents, but not to enamel strippers. BONDERITE® S-FN 213 ACHESON as a lubricant coating provides clean, dry, long-wearing, and superior maintenance-free lubrication for a wide range of light to medium load applications. A thin film of BONDERITE® S-FN 213 ACHESON keeps wear uniform and reduces friction on mating metal parts without requiring increased manufacturing tolerances. Components are protected from metal-to-metal contact even in applications approaching boundary lubrication, reducing the risk of damage due to partial or complete seizure. Formulated from processed micro-graphite and epoxy resin, BONDERITE® S-FN 213 ACHESON forms tightly adherent coatings on many types of substrates. In addition to high lubricity, BONDERITE® S-FN 213 ACHESON coatings exhibit extremely good wear resistance to oils and solvents (except enamel strippers).

PARALOID™ B-66 100% Resin thermoplastic acrylic resin is an excellent general-purpose resin with the same characteristics as the solution grade. In appropriate solvents, PARALOID™ B-66 100% Resin acrylic resin forms clear solutions, which air-dry extremely fast to form hard, colorless films which display excellent block resistance and color retention.

D.E.H.® 80 is a phenolic hardener based on an unmodified solid reaction product of liquid epoxy resin and bisphenol A containing a polyacrylate flow modifier and about 0.7% of a curing accelerator.

CRAYVALLAC® WN-1135 is a micronised modified polypropylene wax.

AP 8016 is a unique epoxy reactive diluents for epoxy- amine systems derived from Card phenol. With mono epoxy group per mole, it reduces excessive cross linking of the system and with side chain, imparts flexibility to paint films.

Additin® RC 9321 D is a ashless multifunctional oxidation and rust inhibiting additive package for Turbine, Rand;O and Compressor Oils.

Bluesil™ FLD 47 V50 is straight chained polydimethylsiloxanic fluids.

Polycin® 53 is a 100% solids, multifunctional castor oil-based derivative designed for use as a polyol or reactive diluent in polyurethane systems. It will impart flexibility and improved pigment wetting into many polyurethane systems. Polycin® 53, as a reactive diluent, will allow for VOC reduction while imparting the beneficial properties of castor oil derivatives, such as improved flow and leveling.

AP 5000 is a low viscosity, reactive polyamide hardener solution in isopropyl alcohol for epoxy resins based lacquers and coatings.

PARALOID™ A-21 30% Resin is a very hard methyl methacrylate type polymer with enhanced adhesion properties. It is provided as a 30% solution in a toluene/butanol system. The polymer is also available in a solid grade form. Lacquers formulated with PARALOID™ A-21 30% Resin possess excellent intercoat adhesion, hardness, and outdoor durability. PARALOID™ A-21 30% Resin will air-dry rapidly to give clear, colorless films that have excellent resistance to yellowing.

RHOPLEX® 585 is a 100% acrylic binder designed for premium exterior performance in flat and satin Architectural Coatings. It is supplied at high solids for formulation flexibility and does not contain any APEO (alkyl phenol ethoxylate) surfactants. The low coalescent demand of RHOPLEX® 585 allows the formulator to meet the 50g/VOC regulations while still maintaining some freeze thaw stability. Due to its 100% acrylic composition, RHOPLEX® 585 offers good exterior durability.

ADDID® 900 is an adhesion promoter for solvent-borne and waterborne primers and coating formulations. It is based on an amino-functional silane.

HDDA is a difunctional reactive diluent that is commonly used as a component of ultraviolet light (UV) and electron beam (EB) curable coatings and inks. HDDA is particularly useful in coatings and inks where improved elasticity, weathering and adhesion are desired in combination with excellent water resistance.