ALNOVOL® PN 760/PAST

ALNOVOL® PN 760/PAST is a novolac phenolic resin. This product is primarily used as an adhesion promoter, particularly in plastics and elastomers. It is suitable for use in applications like textile cord, where strong adhesion properties are required. The resin enhances the bonding between rubber and other materials, making it a valuable component in tire and cord manufacturing.

Principal: allnex Crosslinkers

Chemical Family: Novolac Phenolic

Labeling Claims: Environmentally Friendly

Features: Good Aging Behavior, Improved Adhesion

Safety Data SheetTechnical Data Sheet
View All Documents

Enhanced TDS

Identification & Functionality

Chemical Family
Novolac Phenolic
Country of Origin
Not Available
Function
Adhesion Promoter
Product Code
MITM11200
Product Functions
Adhesion Promoter
Technologies
Elastomers
Product Families
Elastomers — Elastomer Additives
Surface Modifiers

Features & Benefits

Product Features
Good Aging Behavior,
Improved Adhesion

Applications & Uses

Product Applications
  • ALNOVOL® PN 760/PAST is a non-self-crosslinking modified phenol novolac. The resin is used in rubber compounds as an adhesion promoter for steel and textile cord.
  • ALNOVOL® PN 760/PAST is incorporated into the mix in the first stage of compounding.
  • Due to the low content of free phenol, processing does not generate any vapors, and it is not accompanied by odorous annoyance. ALNOVOL® PN 760/PAST is free of resorcinol.

Characteristics:

  • Non self-crosslinking modified phenol novolac.

Uses:

  • Cord adhesion promoter for rubber.

Properties

Dosage Information
  • ALNOVOL® PN 760/PAST should be added depending on the application field and the used reinforcing material on a level of 2 to 10 phr.
  • For curing highly etherified melamine resins (HMMM), such as Cyrez CRA-200, are recommended.
  • They are added in the second mixing stage together with sulphur and accelerators. For curing, a resin to hardener ratio of approx. 1:2 is recommended.

Regulatory & Compliance

Compliance (Regulatory)
Regulation (EU) No. 2023/1115

Packaging & Availability

Packaging Type
Bags

Principal Information

Group Principal Number
S000001
Principal
allnex Crosslinkers

Storage & Handling

Storage Conditions

At temperatures up to 25°C, storage stability packed in original containers amounts to at least 365 days. Storage under high-humidity conditions should be avoided.

Other

Color (SDS)
Yellow and brown
Item Number
ITM17961
Labeling Claims
Environmentally Friendly
Odor (SDS)
Slight
Other Hazards
Accumulation of fine dust may entail the risk of a dust explosion in the presence of air, By excessive exposure to dust, eye and respiratory tract irritation is possible.
Physical Form
Pellets,
Solid
Processing & Application Methods
Compounding
Product End Uses
Textile Cord
Protect from Freezing
Yes
Soluble In
Alcohol Soluble,
Ether Soluble,
Ketone Soluble
Temperature Control
Yes
USA/DOT UN Number
Not Applicable
Application Information
ValueUnitsTest Method / Conditions
Dosage (Use Level)2.0-10.0phr
Material Composition
ValueUnitsTest Method / Conditions
Phenol Contentmax. 0.5%High Performance Liquid Chromatography (HPLC)
Physical Properties
ValueUnitsTest Method / Conditions
Melting Point80.0°CCapillary Chromatography
Melting Point80.0°CDIN 53181
Softening Point95.0-115.0°CDIN ISO 4625 at 5°C/min
Softening Point95.0-115.0°CRing and Ball Test at 5°C/min
Storage Temperature32.0-77.0°F
Viscosity800.0-1800.0mPa.sDIN 53177 at 23°C, 1:1 in methoxy propanol
SDS Physical and Chemical Properties
ValueUnitsTest Method / Conditions
Autoignition Temperature (SDS)min. 400.0°CDIN 51794
Flash Point (SDS)min. 100.0°CDIN EN ISO 2719
Melting Point (SDS)approx. 80.0°CDIN 53181
Specific Gravity (SDS)1.25-DIN EN ISO 2811
Shelf Life & Stability
ValueUnitsTest Method / Conditions
Shelf Life1095.0d