Products

XIBOND® 240 is a reactive additive to improve the blend morphology of polymer blends. This additive is a random copolymer of styrene and maleic anhydride.

Paricin® 285 Ground is a brittle waxlike solid formed from the reaction of an amine with hydroxystearic acid. The formed hydroxystearamide is a high melting point, wax-like material that is extremely resistant to acids and alkalies in contrast to natural and synthetic ester waxes. Paricin® 285 Ground has excellent lubrication, anti-static and pigment wetting properties.

XIBOND® 120 is a reactive additive to improve the blend morphology of polymer blends. This additive is a random copolymer of styrene and maleic anhydride.

CARPOL® GP-6305-55 Polyol is a glycerin-initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 6300 Da. This triol is polymerized with propylene oxide and then capped with 5% ethylene oxide. The outcome is a polyol with enhanced reactivity. Main applications include C.A.S.E., however, CARPOL® GP-6305-55 Polyol may also be included as a component in other urethane products and formulations.

Dynasylan® 6490 is a vinyl silane concentrate (oligomeric siloxane) containing vinyl and methoxy groups. Dynasylan® 6490 is a colorless, nearly odorless low-viscosity liquid.

Bayferrox® 7135 is an inorganic pigment categorized under the chemical family of chemical mixtures and blends.

Polycin® D-140 is a 100% solids, castor oil-based derivative designed for use as a polyol or reactive diluent in polyurethane systems. Polycin D-140, with its very low viscosity and secondary hydroxyl groups, will allow for the formulation of higher system solids with improved VOC reduction and longer pot-life. Polycin® D-140 will also impart the beneficial properties of castor oil derivatives, such as improved flow and levelling.

PEBAX® MH 1657 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide. Pebax® MH 1657 resin is an inherently dissipative polymer and can be dry blended or compounded with an isolative polymer to lower the surface resistivity of the final part. This hydrophilic grade when extruded into either a thin film or laminated on to a substrate also offers excellent permeability to moisture vapor while remaining waterproof.

LOTRYL® BESTPEEL 2407 is a ready-to-use thermoplastic composition designed to make peelable heat seal layers onto various substrates. The base resin is a random ethylene-methyl acrylate copolymer.

CARPOL® GP-700 is a glycerin-initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 700 Da. This triol is polymerized solely with propylene oxide for controlled reactivity. Main applications include C.A.S.E. and flexible foam, however, CARPOL® GP-700 may also be included as a component in other urethane products and formulations.

AEROXIDE® TIO2 T 805 is a highly dispersed, fumed titanium dioxide that has been treated with octylsilane to achieve a hydrophobic surface. This product is not intended for use as a UV-filter in cosmetic sunscreen formulations. Microfine titanium dioxide for use as a UV-filter in cosmetic sunscreens is available from Evonik Consumer Specialties under the tradename TEGO® Sun T 805.

Bayferrox® 6730 is an inorganic pigment, specifically Pigment Red 101, based on iron(III) oxide. It is a single ingredient product used in various industrial applications for pigmentation.

Bayferrox® 921 is an inorganic pigment belonging to the iron oxides chemical family.

Silcolapse® 426R is a non-ionic aqueous emulsion based on polydimethylsiloxane oil. It has 30% active matter content and is recommended for the prevention, control or elimination of foam in aqueous systems.