Enhanced TDS
Identification & Functionality
- Basestock
- Chemical Family
- Product Code
- MITM15268
- RTU Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Product Benefits
• Inherent high viscosity indices provide broad operating temperature range
• High flash point provides excellent fire resistance
• Ester-based, ashless and silicon-free fluid provides clean performance improving system reliability
• Excellent biodegradation and aquatic toxicity testing provides “eco-friendly” product
• Unique formulation provides excellent compatibility with other fire-resistant fluids allowing for easier changover procedure
Applications & Uses
- Application Area
- Compatible Substrates & Surfaces
- Markets
- Applications
- Product Applications
- ANDEROL® BIO GUARD FRHF 68 is highly recommended for hydraulic systems in high, low or broad temperature range environments that require a greater degree of fire resistance than that offered by conventional mineral oil-based fluids.
- It is also suitable for applications where environmentally sensitive products are preferred such as off-road construction vehicles and machinery.
Properties
- ISO Viscosity Grade
- Physical Form
- Compatibility Data
ANDEROL® BIO GUARD FRHF 68 is compatible with elastomers, seals and hoses generally used with conventional mineral oil-based products. Care should be taken when converting systems containing phosphate ester or polyalkylene glycol fluids.
Principal Information
- Group Principal Number
- S000008
- Principal
Other
- Appearance (SDS)
- Liquid
- Color (SDS)
- Light yellow
- Odor (SDS)
- Mild
- Other Hazards
- None known
- USA/DOT UN Number
- Not Applicable
- Chemical Properties
Value Units Test Method / Conditions Acid Number 1.29 mg KOH/g mg KOH/g ASTM D664 - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 0.0 d d - Physical Properties
Value Units Test Method / Conditions Fire Point 374.0 °C °C ASTM D92 Flash Point 316.0 °C °C Cleveland Open Cup Flash Point 316.0 °C °C ASTM D92 Foam Tendency 0.0 ml ml ASTM D892 Sequence I Pour Point -45.0 °C °C ASTM D97 Specific Gravity 0.934 - ASTM D4052 at 15.6°C Viscosity 12.0 cSt cSt ASTM D445 at 100°C Viscosity 65.3 cSt cSt ASTM D445 at 40°C - Application Information
Value Units Test Method / Conditions Demulsibility max. 30.0 m m ASTM D1401 at 54°C, 0mL, emulsion Demulsibility max. 30.0 m m ASTM D1401 at 54°C, 37ml, water Demulsibility max. 30.0 m m ASTM D1401 at 54°C, 43ml, oil - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Density (SDS) 0.9-0.94 g/cm³ g/cm³ Flash Point (SDS) min. 572.0 °F °F Open Cup Pour Point (SDS) -6.0 °F °F Relative Density (SDS) 0.92 - Viscosity (SDS) 61.2-74.8 mPa.s mPa.s ASTM D445 at 40°C