Products

DzBh Baling® SEBS YH-688 is a radial hydrogenated styrene/butadiene block copolymer designed with high midblock content to increase the compatibility with polypropylene.

GENIOPLAST® PP50S12 is a pelletized masterbatch formulation. GENIOPLAST® PP50S12 contains 50 % of a non- reactive, ultra-high molecular weight silicone gum, dispersed in polypropylene homopolymer. It has been specifically developed as additive to improve scratch resistance in polypropylene based compounds for automotive interior applications.

Esterex™ NP343 is a API category Group V fluids. Esterex™ NP343 has excellent low-temperature properties, good lubricating properties, and low volatilities. Esterex™ NP343 can be used as sole basestocks or blendstocks with other synthetic fluids in many automotive and industrial lubricant applications. Esterex™ NP343 is ideal for use in highly loaded, high-speed lubricant applications where energy efficiency is desired.

Esterex™ NP451 is a API category Group V fluids. Esterex™ NP451 has excellent low-temperature properties, good lubricating properties, and low volatilities. Esterex™ NP451 can be used as sole basestocks or blendstocks with other synthetic fluids in many automotive and industrial lubricant applications. Esterex™ NP451 is ideal for use in highly loaded, high-speed lubricant applications where energy efficiency is desired.

Esterex™ A41 is a API category Group V fluids. These esters have excellent low-temperature properties, high viscosity indices, good lubricating properties, and low volatilities. Esterex™ A41 can be used as sole basestocks or blendstocks with other synthetic fluids in many automotive and industrial lubricant applications. Esterex™ A41 is ideal in high-temperature conditions, such as reciprocating air compressors, where discharge valve cleanliness is required.

Esterex™ A34 is a API category Group V fluids. Esterex™ A34 has excellent low-temperature properties, high viscosity indices, good lubricating properties, and low volatilities. Esterex™ A34 can be used as sole basestocks or blendstocks with other synthetic fluids in many automotive and industrial lubricant applications. Esterex™ A34 is ideal in high-temperature conditions, such as reciprocating air compressors, where discharge valve cleanliness is required.

EBECRYL® 350 is a silicone diacrylate that improves slip, substrate wetting, and coating flow and leveling when used as an additive in formulations cured by ultraviolet light (UV) or electron beam (EB). Cured films containing EBECRYL® 350 will exhibit a smooth, tack free surface, with good blocking resistance. Because of its acrylate functionality, the silicone cures into the polymeric backbone, thus eliminating the migration that free silicones often display in coatings.

EBECRYL® 571 is a diluted polyester resin for narrow web shrink sleeve applications. It exhibits excellent adhesion, high flexibility, and superb shrink performance. For optimum performance EBECRYL 571 should be the dominant resin in the heat shrink ink formulation. EBECRYL 571 contains dipropyleneglycol diacrylate (DPGDA)(1) monomer.

ALPASTE® 7130N has a very narrow particle size distribution. The extra fine particles, which can cause a loss of color saturation, have been removed. Because of this process, it produces attractively bright and clear finishes.

CYMEL® 250 Resin is a new type of mixalkylated methylated and n-butylated melamine formaldehyde resin with high imino functions. It is designed specifically for automotive coating system and does not require a strong acid catalyst for fast cure response. CYMEL® 250 Resin is similar reactivity to conventional n-butylated melamine resin. A formulation by using CYMEL® 250 Resin can achieve lower VOC, compared to a formulation by using conventional n-butylated melamine formaldehyde resin.

EBECRYL® 180 is a multifunctional reactive diluent with a high degree of acrylic unsaturation and finds use in a variety of ultraviolet light (UV) and electron beam (EB) curable coatings and ink systems where a high degree of crosslinking is desired. EBECRYL® 180 is a mixture of predominantly the tri- and tetra-acrylate esters of pentaerythritol. EBECRYL® 180 has a higher ratio of tetra- to tri-acrylate ester than the similar product PETIA, and therefore typically crystallizes at normal ambient temperatures.

EBECRYL® 246 is a difunctional aliphatic urethane acrylate that does not contain any intentionally added organic tin compounds, heavy metals*, hydroquinone (HQ) or methyl ether of hydroquinone (MEHQ). (Please note that quinones are present in many raw materials, so the overall quinone content is reduced, but not zero in EBECRYL 246.) Films of EBECRYL 246 cured by ultraviolet light (UV) or electron beam (EB) exhibit excellent abrasion resistance, toughness and flexibility, and are resistant to yellowing.

EBECRYL® 3300 is a highly reactive epoxy acrylate, diluted in DPGDA. When formulated and cross-linked with other suitable radiation curable oligomers and reactive diluents, it results in durable, hard-elastic and chemically resistant coating films of high quality. For UV curing a suitable photoinitiator must be added to the formulation. The addition level depends on the line speed, number of lamps and thickness of the coating film.