Enhanced TDS
Identification & Functionality
- CASE Ingredients Functions
- Function
- Hardener
- Product Code
- MITM12082
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Key Features
Epoxy coating systems cured with AP 1001LV present the following features.
- Suitable for low temperature cure.
- High levels of mechanical stability.
- Good adhesion to marginally prepared surfaces.
- Resistance to aqueous alkaline, acid and saline solutions.
- Good corrosion resistance.
Applications & Uses
- Application Method
- Coating End Applications
- Compatible Polymers & Resins
- Product Applications
- AP 1001 LV is used in combination with liquid epoxy resins or solids epoxy resin solution or epoxy resin modified by means of reactive diluents or non-reactive diluents. Suitable for making high solids and solvent less coating compositions with a workable wide range of pot lives.
- AP 1001 LV is Suitable for application with standard one-component airless spray systems. Ideal for marine and protective coatings e.g. structural steel, concrete flooring etc. Compatible with other hardeners like polyamides, amine adducts etc.
Properties
- Physical Form
Regulatory & Compliance
- Contains any chemicals listed on Prop 65 (including impurities, residues, catalysts, monomers, and by-products and excluding heavy metals)?
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S001795
- Principal
Storage & Handling
- Storage Conditions
- AP1001LV should be stored in a dry place, preferably in the sealed original container at temperatures 5 to 30°C. AP1001LV should not be stored exposed to direct sunlight.
- Shelf life: (5 to 30°C): 6 months. Hazardous decomposition products: (When in fire) carbon monoxide, carbon dioxide, nitrogen oxides, and other toxic gases and vapors.
- Handling Information
- The hardener will absorb moisture & carbon dioxide when left in open containers. This may result in increased viscosity & sometimes crystallization. Use personal protective equipments and follow industrial hygienic procedures.
- Recommended to use safety glasses, protective clothing, gloves, & masks suitable for chemical and solvents & their vapor.
Other
- ADR/RID/ADN Proper Shipping Name
- Epoxy Hardener AP 1001LV, Corrosive liquids, N.O.S. 1760
- Appearance
- Clear yellow colored liquid
- Color (SDS)
- Yellow
- IATA/ICAO Proper Shipping Name
- Epoxy Hardener AP 1001LV, Corrosive liquids, N.O.S. 1760
- IMO/IMDG EmS Fire
- F-A
- IMO/IMDG EmS Spill
- S-B
- IMO/IMDG Proper Shipping Name
- Epoxy Hardener AP 1001LV, Corrosive liquids, N.O.S. 1760
- Insoluble in (SDS)
- Water
- Item Number
- Odor
- Amine
- Odor (SDS)
- Ammonia - like
- Other Hazards
- Corrosive, Harmful if in contact with skin Harmful if swallowed.Classification ( Directive)
- USA/DOT UN Number
- UN1760
- Optical Properties
Value Units Test Method / Conditions Color Scale max. 10.0 Gardner Gardner Color Scale max. 10.0 ASTM ASTM ASTM D1544 - Chemical Properties
Value Units Test Method / Conditions Amine Value 310.0-345.0 mg KOH/g mg KOH/g ISO 9702 - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 6.0 mo mo - Physical Properties
Value Units Test Method / Conditions Density 0.98-1.0 kg/L kg/L ASTM D1475 at 25°C Dry to Set Time 8.0 hr hr BK Dry Time Recorder at 25°C Dry to Set Time 30.0 hr hr BK Dry Time Recorder at 5°C Viscosity 1500.0-3500.0 mPa.s mPa.s DIN 53015 at 25°C Viscosity 1500.0-3500.0 mPa.s mPa.s ISO 12058 at 25°C - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Density (SDS) 0.99 g/cm³ g/cm³ at 25°C Flash Point (SDS) 70.0 °C °C Non-Volatile Content (SDS) min. 96.0 % % Viscosity (SDS) 1500.0-3000.0 mPa.s mPa.s at 25°C