Products

Rostabil TPP is an antioxidant and thermal stabilizer used in paints and coatings and plastics and elastomers. It is suitable for transesterification processes and functions as a heat stabilizer and general stabilizer.

WANNATE® IT-100 is a cycloaliphatic polyisocyanate based on isophorone diisocyanate. WANNATE® IT-100 is a solvent-free material, supplied as pellets. This cycloaliphatic polyisocyanate is light-stable and non-yellowing. It has especially been developed as an isocyanate crosslinking agent for 2K PUR coatings or adhesives. It is also supplied as 70 pbw. solutions in various solvents.

AP 5660 is a low viscosity, modified aliphatic amine hardener for epoxy resins based coatings at ambient and elevated temperature curing.

D.E.H.® 804 is an amine curing agent dissolved in water and designed to emulsify epoxy resins. The product contains no VOC according to the European Directive 2004/42/EC and no alkyl phenol. D.E.H.® 804 is an amine curing agent dissolved in water and designed to emulsify epoxy resins. The product contains no VOC according to the European Directive 2004/42/EC and no alkyl phenol. Benefits D.E.H. 804 serves as a curing agent for self-leveling floorings. When cured with D.E.R. 3221 above a D.E.H. 805 based primer, D.E.H.® 804 did not contribute to significant emissions, such that the full flooring system could pass the AgBB evaluation scheme and get labeled A+ according to the French labeling of construction products evaluation scheme. D.E.H.® 804 is also suitable for the development of flooring on green concrete or where water is expected to migrate from the substrate.

AP 5658 is a low viscosity, modified aliphatic amine hardener for epoxy resins based coatings at ambient and elevated temperature curing.

D.E.H.® 39 Epoxy Curing Agent is a liquid cycloaliphatic polyamine curing agent. D.E.H.® 39 Resin is a low viscosity aliphatic polyamine based on aminoethylpiperazine (AEP). D.E.H.® 39 Curing Agent provides a short pot-life and cures in minutes with liquid epoxy resins. Similar in application to D.E.H. 20, 24, 26 and 29 Epoxy Curing Agents, D.E.H.® 39 Curing Agent is used for maintenance paints, the manufacture of epoxy-amine adducts, in adhesives, civil engineering applications and as an accelerator for polyamide curing agents. In electrical applications, D.E.H.® 39 Curing Agent is used for casting, potting and encapsulation. D.E.H.® 39 Curing Agent is often used for epoxy composite materials.

Bluesil™ EMUL E1P is an oil in water emulsion containing 35% of a silicone oil. It can be used in many industries.

D.E.H.® 4723 Epoxy Curing Agent is modified cycloaliphatic polyamine curing agent for epoxy resins.

D.E.H.® 591 specifically designed for high chemical resistance applications.

EBECRYL® 350 is a silicone diacrylate that improves slip, substrate wetting, and coating flow and leveling when used as an additive in formulations cured by ultraviolet light (UV) or electron beam (EB). Cured films containing EBECRYL® 350 will exhibit a smooth, tack free surface, with good blocking resistance. Because of its acrylate functionality, the silicone cures into the polymeric backbone, thus eliminating the migration that free silicones often display in coatings.

EMULSION E-2353 is a hard, all acrylic emulsion designed for use in factory applied, waterborne, interior and exterior wood coatings. Its self crosslinkable chemistry offers good exterior durability and is recommended for interior/exterior primers and topcoats. If EMULSION E-2353 is too hard, it can be blended with a soft polymer, such as RHOPLEXTM AC-261. It can also be reacted with melamine formaldehyde resins, the combination of which offers an extremely durable finish, ideally suited for long term warranty applications.

AP 5654 is a low viscosity aliphatic amine hardener for epoxy resins based lacquers coatings.

AP 5928 is a low viscosity, modified, with epoxy stabilized cycloaliphatic amine hardener for epoxy resin-based lacquers, primers and coatings with good through-hardening even at temperatures down to 8°C.

AP 5645 is a low viscosity, modified aliphatic amine hardener for epoxy resins based lacquers coatings.

D.E.H.® 512 Epoxy Curing Agent is a modified aliphatic amine that is particularly useful as an accelerator of other amines and polyamides. It is also a fast-setting and low temperature curing agent for liquid epoxy resins. It should be used when good flexibility is required.