Enhanced TDS
Identification & Functionality
- Blend
- No
- CI Name
- CI Number
- Chemical Family
- Pigment Type
- Product Code
- MITM07143
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
Applications & Uses
- Markets
- Applications
Properties
- Physical Form
- Notes
²⁸ Pigment test method No. 010⁴¹
²⁹ Pigment test method No. 011⁴¹
⁴¹ Obtainable from LANXESS Deutschland GmbH, Business Unit Inorganic Pigments,
⁵³ Minor elements may arise from the raw materials used. However, these are firmly bound to the crystal lattice as ions.
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
Packaging & Availability
- Packaging Type
- Product Packaging
The product is available in sacks or bulk bags.
Storage & Handling
- Storage Conditions
Protect against weathering. Store in a dry place and avoid extreme fluctuations in temperature.
Other
- Appearance (SDS)
- Powder
- Bulk Density
- 0.9-1.3 g/mL
- Bulk Density (SDS)
- 900.0-1300.0 kg/m³
- Change in Compressive Strength
- max. 10.0 %
- Change in Setting Time
- max. 60.0 m
- Color (SDS)
- Red
- Color Difference
- max. 1.5
- Density
- 5.0 g/mL
- Density (SDS)
- 5.0 g/cm³
- Insoluble in (SDS)
- Water
- Iron Concentration
- min. 97.2 %
- Item Number
- Melting Point (SDS)
- min. 1832.0 °F
- Moisture Content
- max. 1.0 %
- Odor (SDS)
- Odorless
- Other Hazards
- None known.
- Principal
- Relative Tinting Strength
- 97.0-103.0 %
- Water Absorption
- 30.0 g/100g
- Water Solubles
- max. 2.3 %
- pH
- 3.0-7.0
- pH (SDS)
- 3.0-7.0
- Optical Properties
Value Units Test Method / Conditions Color Difference max. 1.5 - Delta E, Binder:Cement mortar Relative Tinting Strength 97.0-103.0 % % Tint color cement - Chemical Properties
Value Units Test Method / Conditions pH 3.0-7.0 - DIN EN ISO 787-9 - Mechanical Properties
Value Units Test Method / Conditions Change in Compressive Strength max. 10.0 % % DIN EN 196-1 as strength loss as unpigmented mix - Physical Properties
Value Units Test Method / Conditions Bulk Density 0.9-1.3 g/mL g/mL DIN EN ISO 787-11 Change in Setting Time max. 60.0 m m DIN EN 196-3 Maximum difference initial setting time of mixes with/without pigment Density 5.0 g/mL g/mL DIN EN ISO 787-10 Moisture Content max. 1.0 % % DIN EN ISO 787-2 Water Absorption 30.0 g/100g g/100g DIN EN ISO 787-5 Water Solubles max. 2.3 % % DIN EN ISO 787-3 - Material Composition
Value Units Test Method / Conditions Iron Concentration min. 97.2 % % α - Iron(III) Oxide Content - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Bulk Density (SDS) 900.0-1300.0 kg/m³ kg/m³ Density (SDS) 5.0 g/cm³ g/cm³ at 68°F Melting Point (SDS) min. 1832.0 °F °F pH (SDS) 3.0-7.0 - 5% Concentration