Enhanced TDS
Identification & Functionality
- Blend
- No
- Chemical Family
- Chemical Name
- Pigment Type
- Product Code
- MITM09577
- Single Ingredient
- Yes
- Synonyms
- Ferric Ferrous Oxide, Ferro Ferric Oxide, Ferrosoferric Oxide, Iron (II,III) Oxide, Iron(II) Diiron(III) Oxide, Iron(II) Iron(III) Oxide, Triiron Tetraoxide
- Technologies
- Product Families
Properties
Regulatory & Compliance
Packaging & Availability
- Packaging Type
Storage & Handling
- Storage Conditions
- Protect against weathering.
- Store in a dry place and avoid extreme fluctuations in temperature.
- During storage, temperatures above 80°C are to be avoided since irreversible changes in the color of the pigment can occur.
- Storage and Shelf Life Conditions
- This product has an excellent shelf life.
- We recommend that this product is used within ten years of the date of manufacture and limit our product warranty to this period.
- During the first ten years after the date of manufacture we are able to ensure compliance with this specification, provided the material has been stored as stated above and the packaging materials remain undamaged.
- It must be taken into account that the packaging mean can have a shelf life considerably shorter than the one for this product.
- All recommendations and warnings given on the packaging must strictly be adhered to.
- Deviations from storage conditions can lead to undesired changes on side of the packaging materials. These succumb to ageing which may also lead to compromising their capability. Concerning their estimated service life we differentiate between the following packaging materials:
- All kinds of bags (Paper and PE) ........................ 5 years
- All kinds of Bulk bag ......................................... 3 years
- With respect to our Bulk Bags we recommend to avoid UV-radiation because the sewing material of the lifting loops is stabilized against degradation by UV-radiation for appr. 1000 h incident sun radiation for the climate of Central Europe. A more intense sun radiation can shorten this period significantly. In cases of doubt the lifting loops must be checked thoroughly.
Other
- Appearance (SDS)
- Powder
- Bulk Density (SDS)
- 300.0-1000.0 kg/m³
- Coercivity
- 80.0-120.0 Oe
- Color (SDS)
- Black
- Density
- 4.6 g/mL
- Ferric Oxide Content
- min. 98.0 %
- Insoluble in (SDS)
- Water
- Item Number
- Melting Point (SDS)
- min. 1832.0 °F
- Moisture Content
- max. 1.0 %
- Odor (SDS)
- Odorless
- Other Hazards
- None known.
- Particle Size
- 0.5 µm
- Principal
- Remanence
- 11.2-19.0 emu/g
- Saturation Magnetization
- 83.1-93.4 emu/g
- Specific Surface Area
- 3.0-7.0 m²/g
- Specific Surface Area
- 3.0-7.0 m²/g
- pH
- 6.0
- pH (SDS)
- 4.0-7.0
- Chemical Properties
Value Units Test Method / Conditions pH 6.0 - DIN EN ISO 787-9 - Physical Properties
Value Units Test Method / Conditions Coercivity 80.0-120.0 Oe Oe Density 4.6 g/mL g/mL DIN EN ISO 787-10 Moisture Content max. 1.0 % % DIN EN ISO 787-2 ex works Particle Size 0.5 µm µm Scanning Electron Microscopy (SEM) Remanence 11.2-19.0 emu/g emu/g Saturation Magnetization 83.1-93.4 emu/g emu/g Specific Surface Area 3.0-7.0 m²/g m²/g Brunauer-Emmett-Teller (BET) Specific Surface Area 3.0-7.0 m²/g m²/g ISO 9277 - Material Composition
Value Units Test Method / Conditions Ferric Oxide Content min. 98.0 % % - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Bulk Density (SDS) 300.0-1000.0 kg/m³ kg/m³ Melting Point (SDS) min. 1832.0 °F °F pH (SDS) 4.0-7.0 - at 5%