Europrene® SOL T 6414

Europrene® SOL T 6414 is a radial block copolymer obtained by anionic polymerisation. The polymer is based on styrene and butadiene, where bound styrene is 40 % wt and diblock content is 22%. A non staining antioxidant system is added during the production process.

Principal: Versalis Americas Inc

Functions: Polymer Modifier

Chemical Family: Styrene-Butadiene Copolymer

End Uses: Footwear, Hot Melt Adhesive

Labeling Claims: Bovine Spongiform Encephalopathy (BSE)-free, Butylated Hydroxytoluene (BHT)-free, Dual Use Additives (DUAs)-free, Endocrine Disruptor-free, TSE-free, Tris(nonylphenyl)phosphite (TNPP)-free

Features: Excellent Processability, Good Compatibility

Safety Data SheetTechnical Data Sheet
View All Documents

Enhanced TDS

Identification & Functionality

Additives Included
Antioxidant
Blend
No
Chemical Family
Styrene-Butadiene Copolymer
Function
Polymer Modifier
Plastics & Elastomers Functions
Polymer Modifier
Product Code
MITM12591
Single Ingredient
Yes
Technologies
CASE,
Elastomers
Product Families
CASE — Additives
Other Additives
Elastomers — Elastomer Additives
Performance Additives

Features & Benefits

CASE Ingredients Features
Excellent Processability,
Good Compatibility
Labeling Claims
Bovine Spongiform Encephalopathy (BSE)-free,
Butylated Hydroxytoluene (BHT)-free,
Dual Use Additives (DUAs)-free,
Endocrine Disruptor-free,
TSE-free,
Tris(nonylphenyl)phosphite (TNPP)-free
Materials Features
Excellent Dispersibility,
Good Processability,
High Cohesion,
High Elongation,
High Hardness,
High Strength,
High Thermo-Oxidative Stability,
Low Melt Viscosity,
Low Viscosity,
Smooth Surface Finish
Key Features
  • Europrene® SOL T 6414 is a radial block copolymer, characterised by excellent dispersability, processability and thermo-oxidative resistance, combined with high strength, elongation and hardness.

Applications & Uses

Adhesive & Sealant End Applications
Hot Melt Adhesive
Plastics & Elastomers End Uses
Footwear
Product Applications
  • Europrene® SOL T 6414 is designed for hot melt adhesive applications: the grade shows high compatibility with tackifiers and imparts low melt viscosities and an excellent balance of adhesive and cohesive properties to the hot melt products.
  • The grade is also used in footwear compounds, particularly where smooth and glossy surface finishing is required.
  • Characterized by the excellent processability, Europrene® SOL T 6414 is widely used in the modification of polymers and in plastic recycling.

Properties

Physical Form
Granules,
Pellets

Regulatory & Compliance

Quality Standards
FDA

Packaging & Availability

Packaging Type
Bags

Principal Information

Group Principal Number
S002161
Principal
Versalis Americas Inc

Storage & Handling

Storage Conditions
  • Store the preparation in a covered place in sealed packaging, away from sunlight and heat sources.
  • Ensure the proper ventilation in all storage areas.
  • Shelf life : 18 months

Other

Color (SDS)
White
Explosive Nature (SDS)
Product does not present an explosion hazard
Insoluble in (SDS)
Water
Item Number
ITM20089,
ITM20091,
ITM21525
Odor (SDS)
Odorless
Temperature Control
No
USA/DOT UN Number
Not Applicable
Mechanical Properties
ValueUnitsTest Method / Conditions
Elongation at Break850.0-ASTM D412
Elongation at Break850.0-ASTM D4703
Hardness88.0-ASTM D2240
Hardness88.0-ASTM D4703 compression molded
Tensile Modulus3.9 MPaMPaASTM D412 at 300%
Tensile Modulus3.9 MPaMPaASTM D4703 at 300%, compression molded specimens
Tensile Strength26.0 MPaMPaASTM D412
Physical Properties
ValueUnitsTest Method / Conditions
Melt Flow Index11.0 g/10ming/10minASTM D1238 at 190°C, 5 kg
Specific Gravity0.95-ASTM D792
Viscosity0.4 Pa.sPa.sat 25 wt% in toluene
Viscosity0.4 Pa.sPa.sBrookfield Viscometer at 25 wt% in toluene
SDS Physical and Chemical Properties
ValueUnitsTest Method / Conditions
Bulk Density (SDS)300.0-450.0-at 20°C
Density (SDS)0.93 g/cm³g/cm³at 20°C
Ignition Temperature (SDS)min. 400.0 °C°C
Shelf Life & Stability
ValueUnitsTest Method / Conditions
Shelf Life18.0-