Enhanced TDS
Identification & Functionality
- Basestock
- Chemical Family
- Product Code
- MITM13869
- RTU Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Benefits
- Thermal and Mechanical Stability
- Superior mechanical stability versus other thickeners, particularly in the presence of heat and water
- High dropping point, typically in excess of 300°C.Load Carrying & Wear Protection
- Excellent EP and AW properties inherent in the thickener
- Does not require the use of additional additives.Resistance to Water
- Excellent resistance to water washout and spray off. Corrosion Resistance
- Sulfonates are known and used for their excellent rust prevention properties
- This property is inherent in the thickener
- Will easily outperform all other technologies. Resistance to Oxidation
- The use of a premium antioxidant and a high quality oil ensures excellent thermal and oxidation stability
Applications & Uses
- Application Area
- Markets
- Applications
- Product Applications
G-2163-2 Grease is a heavy-duty multipurpose industrial bearing grease. It is specifically designed to perform well under the harshest conditions found in marine environments, steel mills, pulp and paper mills and other similar industries. It is ideally suited to applications where heat, water and extreme loads are encountered.
Properties
Regulatory & Compliance
Packaging & Availability
- Packaging Type
- Packaging Information
G-2163-2 Grease may be handled using conventional grease handling and dispensing methods.
Principal Information
- Group Principal Number
- S000008
- Principal
Other
- Appearance (SDS)
- Paste
- Color (SDS)
- Tan
- Copper Strip Corrosion Test Rating
- 1B
- Insoluble in (SDS)
- Water
- Item Number
- Odor (SDS)
- Mild hydrocarbon like
- USA/DOT UN Number
- Not Applicable
- Thermal Properties
Value Units Test Method / Conditions Bomb Oxidation Pressure Drop 9.0 psi psi ASTM D942 per 1000 Hours - Shelf Life & Stability
Value Units Test Method / Conditions Salt Fog Corrosion Resistance min. 1000.0 hr hr ASTM B117 Salt Fog - Mechanical Properties
Value Units Test Method / Conditions Bearing Life Performance 160.0 hr hr ASTM D3527 Load Wear Index 62.0 kgf kgf ASTM D2596 Mechanical Stability Change 2.4 % % ASTM D217 100000 strokes Mechanical Stability Change 8.0 % % worked 10,000 strokes, with 50/50 water Scar Diameter 0.42 mm mm ASTM D2266 Timken OK Load Test 27.2 kg kg ASTM D2509 Weld Point 500.0 kg kg - Physical Properties
Value Units Test Method / Conditions Drop Point 605.0 °F °F ASTM D2265 Grease Leakage Tendency 4.0 gm gm ASTM D4290 Kinematic Viscosity 135.0 cSt cSt ASTM D445 at 40˚C, base oil Mobility 5.5 g/min g/min US Steel Mobility Test at -180°C Oil Separation 0.2 % % ASTM D1742 Water Washout Loss 1.0 % % ASTM D1264 at 80°C , removed Water Washout Loss 70.0 % % ASTM D4049 retained, to water spray - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Density (SDS) 0.95-1.05 g/cm³ g/cm³ at 25°C Flash Point (SDS) min. 180.0 °C °C Cleveland Open Cup Relative Density (SDS) 0.95-1.05 - at 25°C Vapor Pressure (SDS) max. 8.0 hPa hPa At 20°C