Oxpet WH-6

Oxpet WH-6 is a first intent oxidized petrolatum. It is recommended for use as a rust preventative. It is designed to provide excellent rust protection in formulating industrial lubricating oils, greases, hydraulic fluids, slushing oils and various other protective compounds. With its non-staining characteristics, this product is ideally suited for formulations that call for a high level of rust protection. Nominal dosages would range from 0,1 to 5.0 wt.% of the finished lubricant. Oxpet WH-6 is compatible with most mineral base oils, white oils and synthetic base stocks. The acids present in the Oxidate can be neutralized with bivalent metaloxides, e.g. Calcium- hydroxide, giving end-products of a high molecular weight and wax-like nature with excellent water- resistant and anti-corrosion

Principal: Sonneborn Inc.

Functions: Rust Inhibitor

End Uses: Greases, Hydraulic Fluids, Industrial Lubricants, Lubrication Oils, Slushing Oils

Features: Base Oil Compatible, Corrosion Resistant, Good Rust Inhibition, High Molecular Weight, Non-Staining, Water Resistant, White Oil Compatible

    Enhanced TDS

    Identification & Functionality

    Fluids & Lubricants Functions
    Product Code
    MITM08542
    Technologies
    Product Families

    Features & Benefits

    Applications & Uses

    Properties

    Physical Form

    Regulatory & Compliance

    Certifications & Compliance
    Contains any chemicals listed on Prop 65 (including impurities, residues, catalysts, monomers, and by-products and excluding heavy metals)?

    Principal Information

    Group Principal Number
    S000126
    Principal

    Other

    Insoluble in (SDS)
    Water
    Other Hazards
    When molten only (molten product can cause thermal burns)
    USA/DOT UN Number
    Not Applicable
    Optical Properties
    ValueUnitsTest Method / Conditions
    Color Scale8.0ASTMASTM D1500 diluted solution
    Chemical Properties
    ValueUnitsTest Method / Conditions
    Acid Number42.0-47.0mg KOH/gASTM D664
    Ash Contentmax. 0.5%(W/W)ASTM D482
    Saponification Value110.0mg KOH/gDIN 51559
    Physical Properties
    ValueUnitsTest Method / Conditions
    Congealing Point55.0-65.0°CASTM D938
    Flash Pointmin. 150.0°CASTM D92
    Flash Pointmin. 150.0°CClosed Cup
    Specific Gravity850.0-950.0-at 100°C
    Application Information
    ValueUnitsTest Method / Conditions
    Dosage (Use Level)0.1-5.0%(W/W)
    SDS Physical and Chemical Properties
    ValueUnitsTest Method / Conditions
    Density (SDS)0.8-0.95g/cm³At 100°C
    Flash Point (SDS)min. 150.0°CASTM D92
    Melting Point (SDS)30.0-60.0°C
    Vapor Pressure (SDS)max. 0.1hPaAt 20°C