Enhanced TDS
Identification & Functionality
- Agrochemical Functions
- Chemical Family
- Product Code
- MITM11019
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
Applications & Uses
- Product Applications
- Can be applied to a wide variety of pesticide actives in suspension concentrate formulations.
- Is particularly suited to diuron, simazine and atrazine.
- Recommended usage rate is 50 g/L for a 500-g/L suspension concentrate, although usage rate may vary depending on the requirements of individual formulations.
Properties
- Formulation Type
- Physical Form
- Soluble In
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S002321
- Principal
Storage & Handling
- Storage and Shelf Life Conditions
- The product should retain its conformance to sales specifications for a period of at least two years from date of manufacture if the product is stored at less than 100°F in its undamaged, unopened, factory packaged container.
- In general, the user should determine the suitability of any chemical compound, no matter what the shelf life or length of time of storage.
- Each user should conduct a sufficient investigation to establish the suitability of any product for his intended use.
- TERSPERSE® 4894 DISPersant may be satisfactorily stored in corrosion-resistant containers such as stainless steel tanks or lined steel drums.
- For longer term color stability, it is recommended that the product be stored under an inert atmosphere.
- There should be circulation in the storage vessel to keep the product homogeneous.
- Low pressure steam coils in storage tanks and steam tracing of transfer lines should be provided in cases where low environmental temperatures may make pumping of the product difficult.
Other
- Appearance
- Clear to slightly hazy pale straw-colored viscous liquid
- Appearance (SDS)
- Liquid
- Color (SDS)
- Clear
- Item Number
- Other Hazards
- None known
- USA/DOT UN Number
- Not Applicable
- Chemical Properties
Value Units Test Method / Conditions pH 6.0-8.0 - 1% in 10:6 IPA:H2O - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 2.0 yr yr - Physical Properties
Value Units Test Method / Conditions Density 8.67 lb/gal lb/gal At 20°C Pour Point 31.0 °F °F Viscosity 900.0 cPs cPs Brookfield Viscometer at 20°C - Application Information
Value Units Test Method / Conditions Dosage (Use Level) 50.0 g/L g/L for a 500-g/L suspension concentrate - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) 100.0 °C °C Density (SDS) 1.04 g/cm³ g/cm³ At 21°C Flash Point (SDS) min. 100.0 °C °C Open Cup Relative Density (SDS) 1.0 - at 20°C Viscosity (SDS) 800.0-1000.0 mPa.s mPa.s At 21°C pH (SDS) 5.0-7.0 - 10 g/l