Products

Focus InhibitR 1000 is a high performance, water-soluble corrosion inhibitor for cast iron and steel alloys. It is formulated using a unique mixture of organic acid salts. Focus InhibitR 1000 is very low foaming and has excellent hard water stability. This product does not contain any nitrates/nitrites, boron, or secondary amines.

TERWET® 1004 is a powdered anionic wetting agent. TERWET® 1004, which is a free-flowing off-white powder at 25°C , is readily soluble in water and partially soluble in ethanol and methanol.

TEGO® Humectant 7000 is a polyether humectant used in base chemicals.

ACRYSOL™ RM-8 is a rheology modifier based on (±)-propylene glycol, a diol. It is compatible with polyurethanes (PU).

Exolit® OP 560 is a flame retardant that can be used for flexible polyurethane foams. It is a medium viscosity liquid and it is based on a non-halogenated phosphorus polyol. The product is a reactive flame retardant which can be chemically reacted into the polymeric matrix. Therefore, very low fogging values can be achieved which meet the most stringent emission standards for PU flexible foams in the automotive industry.

PARALOID™ A-21LV 30% Resin is a very hard methyl methacrylate polymer with enhanced adhesion properties. It is supplied as a 30% solution in a toluene/MEK/butanol solvent system. The polymer is also available in solid grade form. PARALOID™ A-21LV 30% Resin is similar to PARALOID™ A-21LV 30% Resin in characteristics and uses but because of its solvent system, PARALOID™ A-21LV 30% Resin possesses better compatibility with cellulosics, such as nitrocellulose and cellulose acetate butyrate. PARALOID™ A-21LV 30% Resin also will allow a higher solids content at spray viscosity.

TEGO® DISPers 655 is a widely usable wetting and dispersing additive. Suitable for solvent borne, waterborne, and radiation-curing formulations and for universal colorants. Primarily stabilizes inorganic pigments, fillers, and effect pigments like aluminum pigments.

POLYGLYKOL P 41/300 is used in elastomer, leather, rubber, and textile processing, as well as heat transfer and metalworking fluids. It acts as a crosslinking agent, humectant, and solvent and is compatible with polyesters and polyurethanes (PU).

Preventol® BIT 20 D is a biocide used in industrial additives applications.

D.E.H.® 622 is an modified amine curing agent for epoxy resins.

TERMIX® 4110 is a surfactant used in ornamentals, pest control, and turf management.

TEGO® Flow 425 is a universal, siloxane-based flow and anti-crater additive. It is highly compatible and suitable for a broad range of coatings.

CYMEL® 323 is a crosslinking agent that offers fast cure, humidity resistance, improved film hardness, and solvent resistance in CASE ingredients.

Stainban™ 186 is a zinc free, odorless, aqueous tannin stain inhibitor additive for water based primers. The unique mechanism of this product allows it to effectively block tannins in stains, and pigmented coatings. It can be easily incorporated at any stage of the paint manufacturing process and is compatible with a wide range of surfactant and dispersants. StainbanTM 186 is effective at any PVC value of primers, however, it is more economical at higher PVC. It may reduce or eliminate the need for zinc oxide in primer formulations. Paints made with StainbanTM 186 have good storage stability and improved humidity resistance. It is HAPS free and does not contribute to VOC. Typical use level ranges from 1 - 4% based upon total formula weight.

TERMUL® 5429 is a high molecular weight alkoxylate of butanol. This product can be used in formulating agricultural products, in dye and pigment dispersions and in emulsion polymerization. TERMUL® 5429 surfactant is a white solid at room temperature and has a melt point of about 40°C.