Enhanced TDS
Identification & Functionality
- Blend
- No
- Carrier
- Chemical Family
- Chemical Name
- EC Number
- 217-101-2
- Industrial Additives Functions
- Product Code
- MITM08832
- Reaction Type
- Single Ingredient
- No
- Technologies
- Product Families
Features & Benefits
- Industrial Additives Features
- Labeling Claims
- Product Advantages
- Strong gelling catalyst suitable for HCFO-1233zd(E) blown polyurethane foams
- Excellent storage stability with HCFO-1233zd(E) containing polyol blend
- Improve surface cure (high adhesive strength, reduced friability)
- Higher selectiveness in gelling reaction catalysis
Fig. Change in reaction profile
(1233zd(E)/H2O blown foam)Reactivity drift is minimal with 1233zd(E).
Fig. Comparison of Adhesion
(25°C/77 °F, 245fa/H2O blown foam)DM70 provides excellent adhesion.
Applications & Uses
- Industrial Additives End Use
- Product Applications
- Rigid foam (Construction board, sandwich panel and spray foam)
- Fast cure catalyst for polyether polyol based shoe sole system
- Integral skin foam (All water and HCFO-1233zd(E) blown system)
- Internal cure catalyst for polyester polyol based slabstock flexible foam
Properties
- Physical Form
- Soluble In
Regulatory & Compliance
- Contains any chemicals listed on Prop 65 (including impurities, residues, catalysts, monomers, and by-products and excluding heavy metals)?
Technical Details & Test Data
- Technical Information
Catalytic Activity
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S000009
- Principal
Other
- Color (SDS)
- Pale yellow
- Item Number
- Odor (SDS)
- Ammonia - like
- USA/DOT Proper Shipping Name
- Not Applicable
- USA/DOT UN Number
- Not Applicable
- Chemical Properties
Value Units Test Method / Conditions Amine Value 393.0-423.0 mg KOH/g Hydroxyl Value 542.4 mg KOH/g pH 10.7 - at 20°C, 10% Aqueous Solution - Physical Properties
Value Units Test Method / Conditions Boiling Point 198.0-205.0 °C Flash Point 113.0 °C Freeze Point max. -10.0 °C Specific Gravity 1.04 - at 20°C, Water = 1 Vapor Density 2.85 - Air = 1 Vapor Pressure max. 13.0 Pa At 20°C Viscosity 10.0 mPa.s At 25°C - Application Information
Value Units Test Method / Conditions Dosage (Use Level) 1.5 pbw Flexible foams Dosage (Use Level) 1.2 pbw Rigid foams - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) 198.0-205.0 °C Flash Point (SDS) 113.0 °C Relative Density (SDS) 1.04 - Vapor Density (SDS) 2.85 g/mL Air = 1 Vapor Pressure (SDS) max. 13.0 Pa At 20°C pH (SDS) 10.7 - At 20°C, 10% Aqueous Solution