Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Code
- MITM13462
- Technologies
- Product Families
- Chemical Structure
Features & Benefits
- Materials Features
- Product Benefits
- Improved flexibility from polyether
- Amine end group more reactive than alcohol
Applications & Uses
- Compatible Polymers & Resins
- Product Applications
- Molecular weight control in polyamides
- Preparation of comb polymers with poly(acrylic acid) or similar linear polymers
- Preparation of epoxy resin adducts
Properties
- Physical Form
Regulatory & Compliance
- Contains any chemicals listed on Prop 65 (including impurities, residues, catalysts, monomers, and by-products and excluding heavy metals)?
Principal Information
- Group Principal Number
- S002219
- Principal
Storage & Handling
- Handling Information
At temperatures of 75-100°F (24-38°C) Tanks, Lines, valves Carbon steel Pumps Carbon steel Heat exchange surfaces Stainless steel Hoses Stainless steel, polyethylene, polypropylene, and TEFLON®
Gaskets, packing Polypropylene or TEFLON® (elastomers such as neoprene, Buna N, and VITON® should be avoided)
Atmosphere Nitrogen or dry air At temperatures above 100°F (38°C) Tanks Stainless steel or aluminum Lines, Valves Stainless steel Pumps Stainless steel or Carpenter 20 equivalent Atmosphere Nitrogen - ZHENGDA® ® ZM 160 Amine-terminated Polyether may be stored under air at ambient temperatures for extended periods.A nitrogen blanket is suggested for all storage, however, to reduce the effect of accidental exposure to high temperatures and to reduce the absorption of atmospheric moisture and carbon dioxide. It should be noted that pronounced discoloration is likely to occur at temperatures above 140°F (60°C), whatever the gaseous pad.
- Cleanout of lines and equipment containing ZHENGDA® ZM 160 Amine-terminated Polyether can be accomplished using warm water and steam. In the event of spillage of this product, the area may be flushed with water. The proper method for disposal of waste material is by incineration with strict observance of all federal, state, and local regulations.
Other
- Appearance
- Colorless to pale yellow liquid with slight haze permitted (at 60°C)
- Appearance (SDS)
- Clear viscous liquid
- Color (SDS)
- Colorless
- Explosive Nature (SDS)
- Not explosive
- Odor (SDS)
- Amine - like
- Other Hazards
- This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
- Oxidizing Properties (SDS)
- Not oxidising
- USA/DOT UN Number
- Not Applicable
- Optical Properties
Value Units Test Method / Conditions Color Scale max. 75.0 Pt-Co - Chemical Properties
Value Units Test Method / Conditions Amine Hydrogen Equivalent Weight 291.0 g/eq Free Amine Content 1.58-1.79 meq/g pH 12.0 - - Physical Properties
Value Units Test Method / Conditions Density 8.17 lb/gal At 25°C Flash Point 129.0 °C Pensky-Martens Closed Cup (PMCC) Melting Point -40.0 °C - Material Composition
Value Units Test Method / Conditions Acetylatables Content 1.65-1.85 meq/g - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Density (SDS) 0.979 g/mL at 25°C Flash Point (SDS) 129.0 °C Melting Point (SDS) -40.0 °C pH (SDS) 12.0 -