Products

RHOPLEX® AC-264 is a unique high solids, 100% acrylic emulsion vehicle for exterior latex paints which provides a high level of adhesion to chalky substrates. RHOPLEX® AC-264 represents a slight modification of RHOPLEX® AC-64 is recommended as a substitute for the latter product. As when making any raw material change, the formulator should check key properties such as color acceptance and adhesion.

RHOPLEX® AC-337N is designed for use in semi-transparent stains. This binder provides an extremely hydrophobic film, leading to excellent water resistance and reduced liquid water permeability. RHOPLEX® AC-337N Acrylic Emulsion has been developed to react more efficiently with associative thickeners, leading potentially to lower formulation cost. RHOPLEX® AC-337N Acrylic Emulsion also shows improved color acceptance and alkyd compatibility. The 100% acrylic backbone ensures the high standard of tint retention, crack resistance, chalk resistance, and alkali resistance. The outstanding adhesion technology will ensure excellent adhesion to wood. RHOPLEX® AC-337N can clarity makes it possible to prepare transparent and semi-transparent stains with more attractive application properties than conventional alkyd emulsion or acrylic emulsion based stains.

EBECRYL® 860 is an epoxidized soya oil acrylate especially suited to improving the flow and leveling of ultraviolet light (UV) or electron beam (EB) curable inks and coatings. Pigment wetting and adhesion are often enhanced when EBECRYL® 860 is used as a modifier in inks and clear or pigmented coatings on paper and metal.

EBECRYL® 608 is a bisphenol A epoxy diacrylate diluted approximately 27% by weight with the reactive diluent OTA- 480, propoxylated glycerol triacrylate. EBECRYL® 608 exhibits light color and very fast cure response. Films of EBECRYL® 608 cured via exposure to ultraviolet light (UV) or electron beam (EB) demonstrate high surface hardness and gloss, low residual odor and excellent chemical resistance.

EBECRYL® 885 is a trifunctional polyester acrylate oligomer. Films of EBECRYL® 885 cured by ultraviolet light (UV) or electron beam (EB) exhibits high flexibility and excellent abrasion resistance. EBECRYL® 885 is recommended for parquet floor coating, wood furniture coating applications and flexible coatings for metal.

EBECRYL® 4654 is an aliphatic urethane acrylate supplied at 60% solids in n-butyl acetate. Films of EBECRYL® 4654 are physically dry after evaporation of the solvent. EBECRYL® 4654 exhibits high reactivity in ultraviolet (UV) and electron beam (EB) energy curable coatings and yields hard polymers. Coatings based on EBECRYL® 4654 demonstrate good exterior durability, resistance to yellowing, and chemical and mechanical resistance properties.

EBECRYL® 895 is a dipentaerythritol hexaacrylate belonging to the acrylics and acrylates chemical family. It functions as a monomer and oligomer in CASE ingredients.

EBECRYL® 2221 is a hexafunctional aromatic urethane acrylate that provides very fast cure response when exposed to ultraviolet light (UV) or an electron beam (EB). Cured films of EBECRYL® 2221 exhibit good hardness and solvent resistance.

TERSPERSE® 2280 is a surfactant classified as a chemical mixture and blend, used in industrial additives.

ZHENGDA® ZD-1400 Polyether amine(also called Amine-terminated Polyether) is characterized by repeating oxypropylene units in the backbone. As shown by the representative structure, ZHENGDA® ZD-1400 Amine-terminated Polyether is a difunctional, primary amine with average molecular weight of about 4000. The primary amine groups are located on secondary carbon atoms at the end of the aliphatic polyether chains.

CYMEL® 1125 resin is a highly methylated/ethylated, carboxyl-modified benzoguanamine crosslinker supplied in 2-butoxy ethanol. It is especially designed for electro-deposition primer formulations requiring excellent corrosion and detergent resistance. The structure of CYMEL® 1125 resin offers superior adhesion to metal substrates. CYMEL® 1125 resin can be used in a wide range of general purpose industrial finishes. However, because CYMEL® 1125 resin contains chelating groups which can form colored compounds with heavy metal ions such as iron and zinc, it is recommended for use in only dark single coat applications or primers, and not in pastel colors. Benzoguanamine resins have poor resistance to UV light, hence CYMEL® 1125 is not suitable for exterior applications

EBECRYL® 4266 is a Unsaturated aromatic epoxy acrylate. In the formulation of UV-curing and EB coatings. Without reactive thinner.

EBECRYL® P39 is a polymeric benzophenone derivative that functions as the photosensitizer in hydrogen abstraction type radical photoinitiator systems. EBECRYL® P39 has been designed for use in the formulation of UV coatings that exhibit little or no odor after curing. Recommended levels are from 8 to 10% based on total formulation. EBECRYL® P39 should be used in combination with amine co-initiators such as EBECRYL® P115 or EBECRYL® 7100, or with amine modified acrylate resins. EBECRYL® P39 is a polymer preparation manufactured in the European Union with (pre)registered monomers/reactants and REACH compliant.

RHOPLEX® 2500 is designed for tough, water-resistant masonry paints and primers. Coatings based on RHOPLEX® 2500 possess very good adhesion to masonry substrates, excellent durability (gloss and tint retention, and dirt pickup resistance), and the ability to retard efflorescence in cured cementitious products.

OREVAC® 18730 is a maleic anhydride modified polypropylene.