Products

Silcolapse® 426R U1 is a non-ionic aqueous emulsion based on polydimethylsiloxane oil. It has 30% active matter content and is recommended for the prevention, control or elimination of foam in aqueous systems.

Silcolapse® 5020 is a non-ionic aqueous emulsion containing dimethylpolysiloxane, and is highly effective for prevention, control and elimination of foam in aqueous media. Silcolapse® 5020 contains 20% of active ingredient and is designed for industrial uses. Other specialized defoaming agents exist for use in food contact please consult us about them.

Silcolapse® 454 is a compound containing polydimethylsiloxane oil and a mineral filler in colloidal dispersion. It is intended mainly for treating anhydrous media, but also aqueous media, in numerous industries (oil, crop protection products, detergents, chemicals, etc.). Its excellent behaviour in alkaline media and its efficiency in a wide range applications are of interest. Silcolapse® 454 is intended for industrial use only, and it should not be used in the manufacture of foodstuffs, cosmetics or pharmaceutical products.

CARPOL® NIONIC™ 850 Polyglycol is a nonionic surfactant with a chemical structure designed to make it act as a defoamer in many applications. Even at very low concentrations, CARPOL® Nionic™ 850 can be used to reduce the superficial tension of liquids, including high viscosity liquids. Defoaming performance is a function of cloud point and end use temperature. These materials are water soluble at low temperatures and will flocculate when warmed above their cloud point.

Bluesil™ SP 3304 is a non-hydrolysable polyether modified polydimethylsiloxane.

Silcolapse® 610 is a 100% active silicone antifoam and/or defoamer. It offers excellent antifoam and defoaming properties in a wide variety of aqueous and non-aqueous industrial applications. Silcolapse® 610 effectively controls foam at concentrations as low as 10 ppm solids, even at elevated temperatures. Silcolapse® 610 gives good results at wide-ranging pH and provides a cost effective solution where foam is a problem.

Silcolapse® 721 is a non-ionic aqueous 10% active silicone antifoam and/or defoamer. It offers excellent antifoam and defoaming properties in a wide variety of aqueous applications including those with incidental food contact as well as food processing applications. Silcolapse® 721 effectively controls foam at concentrations as low as 10 ppm solids, even at elevated temperatures. Silcolapse® 721 gives good results at wide-ranging pH and provides a cost effective solution where foam is a problem.

Silcolapse® 710 is a 100% active silicone antifoam and or defoamer. It offers excellent antifoam and defoaming properties in a wide variety of aqueous and non-aqueous applications including those with incidental food contact as well as food processing applications. The product effectively controls foam at concentrations as low as 10 ppm solids, even at elevated temperatures. Silcolapse® 710 gives good results at wide-ranging pH and provides a cost effective solution where foam is a problem.

Silcolapse® 426R is a non-ionic aqueous emulsion based on polydimethylsiloxane oil. It has 30% active matter content and is recommended for the prevention, control or elimination of foam in aqueous systems.

CARPOL® NIONIC™ L-62 Surfactant is a nonionic surfactant with a chemical structure designed to make it act as a defoamer in many applications. Even at very low concentrations, CARPOL® NIONIC™ L-62 can be used to reduce the superficial tension of liquids, including high viscosity liquids. Defoaming performance is a function of cloud point and end use temperature and CARPOL® NIONIC™ L-62 is an effective low foam surfactant. These materials are water soluble at low temperatures and will flocculate when warmed above their cloud point. In addition these products are easily removed and leave no residue on surfaces.

CARPOL® NIONIC™ 1400 Polyglycol is a nonionic surfactant with a chemical structure designed to make it act as a defoamer in many applications. Even at very low concentrations, CARPOL® Nionic™ 1400 can be used to reduce the superficial tension of liquids, including high viscosity liquids. Defoaming performance is a function of cloud point and end use temperature and CARPOL® NIONIC™ 1400 has a high cloud point of 77o C. These materials are water soluble at low temperatures and will flocculate when warmed above their cloud point.

Bluesil™ EMUL E1P is an oil in water emulsion containing 35% of a silicone oil. It can be used in many industries.

Silcolapse® 723 is a non-ionic aqueous 30% active silicone antifoam and/or defoamer. It offers excellent antifoam and defoaming properties in a wide variety of aqueous applications including those with incidental food contact as well as food processing applications. Silcolapse® 723 effectively controls foam at concentrations as low as 10 ppm solids, even at elevated temperatures. Silcolapse® 723 gives good results at wide-ranging pH and provides a cost effective solution where foam is a problem.

Bluesil™ SP 3307 is a polyether modified polysiloxane.

Silcolapse® 430 is a compound 100% active containing polydimethylsiloxane oil and silica with an excellent behaviour in a large range of pH. Silcolapse® 430 is mainly intended for treatment of anhydrous and aqueous foaming systems and has many applications in industry and food.