Enhanced TDS
Identification & Functionality
- CASE Ingredients Functions
- Chemical Family
- Function
- Anti-Sticking Agent, Mold Release Agent, Optical Brightener, Release Agent, Tissue Softener, Water Repellent
- Industrial Additives Functions
- Plastics & Elastomers Functions
- Product Code
- MITM15714
- RTU Product Type
- Technologies
- Product Families
Features & Benefits
- Industrial Additives Features
- Ready-to-Use Product Features
Applications & Uses
- Applicable Processes
- Application Area
- Compatible Substrates & Surfaces
- Industrial Additives End Use
- Plastics & Elastomers End Uses
- Markets
- Applications
- Application and Usage Information
- Product Application:
- Mold release of technical rubber, tires, plastics as well as foundry materials.
- Lubricant for web-offset printing.
- Silky sheen for furs.
- Softener in textile finish formulations.
- Water-repellent and anti-adherent for industrial glassware.
- Constituent of maintenance product and polishes: floors, furniture, leather, lubricating, anti-mottling and brightening agent in the printing industry.
- Usage Information:
- As a release agent, BLUESIL EMUL E1P should be applied to clean surfaces in dilutions to 30-100 times its volume by spraying, padding, or brushing. It is applicable to hot surfaces (up to ). Add the water in the emulsion (hardness of water < 250 ppm as CaCO₃).
- In the textile industry, BLUESIL EMUL E1P may be used as follows:
- For softening effect as an additive to finish formulations.
- As a lubricant, after addition to sizing formulae provided that it should be compatible with other constituents of the formula after treatment, drying occurs in the usual conditions, without polymerisation.
- As a brightener for natural or synthetic furs. The treatment is made using spray or lick roll techniques, and drying occurs in the usual conditions: a glossy appearance is thus obtained. BLUESIL EMUL E1P gives no water repellency to the substrates.
- The quantity of BLUESIL EMUL E1P used will depend upon the desired effect and properties.
- Product Application:
Properties
- Physical Form
Principal Information
- Group Principal Number
- S002177
- Principal
Storage & Handling
- Storage and Shelf Life Information
- When stored in its original packaging, Bluesil™ EMUL E1P may be stored at temperatures between 2 and 30°C for up to 12 months from its date of manufacturing.
Other
- Appearance
- Milky liquid
- Color (SDS)
- Milky white
- Insoluble in (SDS)
- Common organic solvents
- Odor (SDS)
- Faint
- Other Hazards
- No data available
- USA/DOT UN Number
- Not Applicable
- Chemical Properties
Value Units Test Method / Conditions pH 6.0-8.0 - - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 12.0 mo mo - Physical Properties
Value Units Test Method / Conditions Specific Gravity 1.0 - at 25°C Viscosity 300.0 mm²/s mm²/s of wet product, wt% - Material Composition
Value Units Test Method / Conditions Dry Matter Content 40.0 % % Silicon Content 35.0 % % - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) 100.0 °C °C Flash Point (SDS) min. 212.0 °F °F Freeze Point (SDS) min. 32.0 °F °F Specific Gravity (SDS) 0.99 - at 68°F Specific Gravity (SDS) 0.99 - at 20°C Vapor Pressure (SDS) 23.0 hPa hPa At 68°F Vapor Pressure (SDS) 23.0 hPa hPa at 20°C pH (SDS) 7.0 -