Products

TERSPERSE® 5719 is a blend of surfactants designed especially for atrazine-containing agricultural suspoemulsion formulations. This blend should be used as a dispersant/wetting agent system for preparing an atrazine suspension, to which an emulsifiable concentrate is added. TERSPERSE® 5719 dispersant should be used as the sole emulsifier in the emulsifiable concentrate. Typical use rates in a suspoemulsion formulation are 4-6% by weight.

Bluesil™ SP 3309 A2 is a highly effective superspreading trisiloxane adjuvant for addition to spray formulations of agrochemicals. Bluesil™ SP 3309 A2 can significantly reduce the surface tension of spray formulations to max. 22 mN/m (the lower limit for conventional non-silicone adjuvants is ~30mN/m). This reduction is dynamically rapid, maximizing the adhesion of spray droplets when they impact on leaf surfaces. Bluesil™ SP 3309 A2 has been extensively optimized to improve efficiency even when applied to the most waxy, hard-to wet leaf surfaces. The spray droplets completely wet the target crop or weed, wrapping onto unsprayed surfaces to deliver insecticides and fungicides to where the pests and diseases may be concealed. The superspreading capability of Bluesil™ SP3309 A2 provides exemplary spray coverage enabling the volume of spray to be reduced without loss of performance. This reduction: Limits water usage Increases coverage area per tankful allowing for faster application speed (reduced refill) Enables lighter loads (less water) for micro-farmers using back-pack sprayers. Bluesil™ SP 3309 A2 is nonionic, making it compatible with all spray mixes.

TERMIX® 5303 is a blend of nonionic surfactants and other components. The product is a clear amber, low viscosity liquid, free of suspended material.

TERMIX® 5800 is a blend of APE free nonionic surfactants.

NOVEL® 1216CO-3 Ethoxylate is a biodegradable nonionic based on a linear primary alcohol formulated to simulate that derived from coconut oil. This 3-mole ethoxylate is made using Sasol Chemicals patented NOVEL technology which yields narrow range products with lower free alcohol, PEG levels and melting ranges when compared to the traditional base-catalyzed methods. It is liquid at room temperature, essentially 100% active and has the following structural formula: CH₃(CH₂)x(OCH₂CH₂)₃OH where ‘x’ varies between 11 and 15.

CARPOL® NIONIC™ 850 Polyglycol is a nonionic surfactant with a chemical structure designed to make it act as a defoamer in many applications. Even at very low concentrations, CARPOL® Nionic™ 850 can be used to reduce the superficial tension of liquids, including high viscosity liquids. Defoaming performance is a function of cloud point and end use temperature. These materials are water soluble at low temperatures and will flocculate when warmed above their cloud point.

TERMIX® 5484 is a solution containing a blend of anionic surfactants. It is a clear amber, low viscosity liquid, free of suspended material.

TERMIX® 5735 Surfactant is a blend of cationic surfactants.

TERWET® 245 is a surfactant and wetting agent used in ornamentals, pest control, and turf management.

TERMIX® 5225 is a solution containing a blend of anionic and nonionic surfactants. It is a clear amber, low viscosity liquid, free of suspended material.

TERMIX® 5920 is a low HLB non-ionic surfactant. It is oil soluble, water dispersible and is compatible with other nonionic surfactants and with most anionic and cationic surfactants. Listed on FIFRA 40CFR 180.910 and 930.

TERMIX® 5910 is a blend of nonionic surfactants. It is a clear, viscous liquid, free of suspended material.

TERMIX® 5400 is a solution containing a blend of anionic and nonionic surfactants. It is a clear amber, low viscosity liquid, free of suspended material.

CARPOL® NIONIC™ 1400 Polyglycol is a nonionic surfactant with a chemical structure designed to make it act as a defoamer in many applications. Even at very low concentrations, CARPOL® Nionic™ 1400 can be used to reduce the superficial tension of liquids, including high viscosity liquids. Defoaming performance is a function of cloud point and end use temperature and CARPOL® NIONIC™ 1400 has a high cloud point of 77o C. These materials are water soluble at low temperatures and will flocculate when warmed above their cloud point.

Bluesil™ SP 3307 is a polyether modified polysiloxane.