Products

ACRYSOL™ TT-935 Rheology Modifier is a hydrophobically modified, alkali-soluble, anionic associative thickener, designed to give medium shear rate viscosity in interior/exterior flat latex paints. ACRYSOL™ TT-935 Rheology Modifier can be used as either a primary or co-thickener in water based coatings. ACRYSOL™ TT-935 Rheology Modifier offers the formulation of paints with excellent resistance to roller spattering with better film build and leveling than conventional thickeners. Paints formulated with ACRYSOL™ TT-935 Rheology Modifier as a sole thickener exhibit improved flow and leveling over that of medium to high molecular weight cellulosic thickeners. The rheology of ACRYSOL™ TT-935 Rheology Modifier can be modified to give further improvements in flow and leveling by addition of low levels of surfactant or glycol ether type co-solvents to reduce the low shear viscosity. Addition of some pre-dispersed colorant may also have this effect. ACRYSOL™ TT-935 Rheology Modifier is recommended for use in interior paints requiring improved flow and leveling, and lower raw material cost compared to cellulosic thickeners. Where superior water resistance is required we would recommend the use of ACRYSOL™ SCT-275 Rheology Modifier. ACRYSOL™ TT-935 Rheology Modifier can be used in exterior paints but we suggest formulators exercise caution to minimize potential blistering which can occur due to the anionic nature of this product. Delivered as a low viscosity liquid, ACRYSOL™ TT-935 Rheology Modifier is very easy to handle and incorporate into the paint. It is resistant to microbiological degradation, thereby avoiding viscosity loss in the paint, a common problem encountered by paint manufacturers.

TEGO® Foamex 16 is a defoamer concentrate based on polyether siloxane technology. Offers a good balance between effectiveness and compatibility. Developed for architectural paints.

TEGO® Foamex 830 is a very compatible defoamer concentrate based on organic polymer technology. Silicone- and solvent-free.

TEGO® AIREX 910 is a dearator solution with outstanding compatibility. Very suitable for sensitive coating systems.

ACRYSOL™ DR-2 Rheology Modifier is a synthetic, liquid thickener that offers a low cost/high performance alternative to cellulosic thickeners in interior flat latex paints. ACRYSOL™ DR-2 Rheology Modifier offers application and feel properties very similar to medium grades of cellulosic thickeners. It also has outstanding spatter resistance. ACRYSOL™ DR-2 Rheology Modifier is easy to handle and incorporate into the paint and is formulated to resist microbial contamination.

TEGO® Foamex 811 is an effective defoamer concentrate based on polyether siloxane technology. Broad usability with an excellent balance of effectiveness and compatibility.

ACRYSOL™ RM-2020 E is a solvent-free, non-ionic, urethane associative thickener offering very versatile means of formulating paints with an optimal film build and high shear viscosity. It is specifically designed for applications where a low odour or low VOC is required and specific environmental requirements are needed.

TEGO® Foamex 3062 is a highly effective defoamer concentrate based on polyether siloxane technology. Very suitable for pigmented and/or highly viscose formulations.

TEGO® Foamex 32 is a highly effective and compatible self-emulsifying defoamer concentrate based on polyether siloxane technology. Especially for architectural paints.

BONDERITE® L-FG ADAG C is an aqueous-based colloidal dispersion. It contains ultra-fine graphite particles along with a unique stabilizer and binder system. These properties produce excellent lubricity and release, faster wetting, and higher dilution ratios. It remains stable at service temperatures of 600°F and intermittent temperatures as high as 2200°F.

TEGO® Foamex 832 is a compatible defoamer concentrate based on organic polymer technology. Free of silicone, solvent, and mineral oil.

TEGO® Foamex 8420 is a solvent-free defoamer concentrate based on polyether siloxane technology. Its outstanding effectiveness makes it the perfect solution for the most challenging defoaming requirements.

TEGO® Foamex 8850 is a compatible bio-based defoamer concentrate based on organic polymer technology. It has broad food contact compliances with green and renewable contents. Suitable for grind, let- down, as well as post-addition.

TEGO® AIREX 922 is a silicone-free deaerator that combines strong defoaming with excellent compatibility. Very efficient for solvent borne and solvent-free systems.