Products

TEGO® AddBond 2325 improves flexibility and adhesion of solvent borne coatings. It is especially suitable for acrylic-based coating systems.

TEGO® AddBond 2220 improves flexibility and adhesion of solvent borne coatings. This soft polyester shows very good compatibility in non-polar formulations.

EBECRYL® 4250 is an undiluted isocyanate functional urethane acrylate designed for use as an adhesion promoter in UV/EB coatings and in two component dual cure systems for coatings on wood, plastic and metal.

Dynasylan® TRIAMO is an organofunctional silane possessing three reactive amino groups and a hydrolyzable trimethoxysilyl group. The dual nature of its reactivity allows Dynasylan® TRIAMO to bind chemically to both inorganic materials (e.g. glass, metals, fillers) and organic polymers (e.g. thermosets, thermoplastics, elastomers) thus functioning as an adhesion promoter and surface modifier. Dynasylan® TRIAMO is a clear, light to dark yellow liquid with a slight amine­like odor. It is soluble in alcohols, ketones, esters and aliphatic and aromatic hydrocarbon solvents.

EBECRYL® 4510 is an isocyanate functional aliphatic urethane acrylate supplied at 90% solids in butyl acetate. It is useful as an adhesion promoter ultraviolet (UV) and electron beam (EB) energy curable coatings and in two-component dual cure coatings.

EBECRYL® 445 is a reactive chlorinated polyester resin diluted 40% with the reactive diluent trimethylolpropane triacrylate (TMPTA)(1). EBECRYL 445 is not based on bisphenol A raw materials, and is tin-free. EBECRYL 445 exhibits good lithographic behavior and pigment wetting properties, and fast cure response in ultraviolet light (UV) curable coatings and inks. Cured films of EBECRYL 445 display good adhesion to metals, and paper.

EBECRYL® 4150 is an undiluted isocyanate functional urethane acrylate designed for use in two component dual cure systems for coatings on wood, plastic and metal.

AERODISP® W 7622 is a low viscosity, water-based dispersion of aerosil fumed silica with a slightly alkaline pH

Dynasylan® SIVO 160 is a water­borne storage stable silane based sol­gel system for the formulation of inorganic surface treatment primers. As part of the SIVO® SOL Technology, it features all the benefits of the other well established products of this series. These are the absence of heavy metals, fluorides, and solvents. It is designed to have a low volatile organic content. Due to its polymeric nature, it is characterized by a high reactivity. This is demonstrated by its extraordinary low curing temperature of 20 to 80 °C which represents a major breakthrough for water­borne sol­gel systems. Dynasylan® SIVO 160 is a clear to slightly opaque, colorless to slightly yellow, low viscosity liquid.

Dynasylan® SIVO 202 is a new multifunctional aminosilane adhesion promoter that can be used for a wide variety of applications.

EBECRYL® 367 is a polyester acrylate, developed to improve the adhesion of inks and varnishes onto plastics.

β-CEA is a mixture of reactive esters, each of which contain both acrylate and carboxylic acid functionality in the same molecule. Referring to the included structural formula, this mixture contains some unreacted acrylic acid (n=0), along with higher adducts of acrylic acid (n=1,2,3...). The dimer (n=1). β-CEA, is the largest single component, and the average molecular weight is equivalent to that of the dimer. β-CEA will polymerize when exposed to sources of free radicals. Because of its carboxylic acid functionality, β-CEA is useful as an adhesion promoter.

LOTADER® 3410 is a random ethylene-butyl acrylate-maleic anhydride terpolymer. LOTADER® 3410 is a versatile adhesive for extrusion coating or lamination, designed as: Concentrate to be used in dry blend with LDPE. LOTADER® 3410 improves adhesion of LDPE on aluminium foils, metallized or primerized films. Ready for use resin to be used pure. LOTADER® 3410 gives excellent adhesion on substrates likes aluminium foil, metallized plastics, paper, board, PE and some plastic films like BOPP. Coextrusion tie layer for PE/PA in extrusion coating process. LOTADER® 3410 can also be used as a coupling agent for mineral filled compounds such as halogen free flame retardant wires and cables, a compatibiliser for polyamide/polyolefin blends and a modifier for polyamides.

LOTADER® 4210 is a random ethylene-butyl acrylate-maleic anhydride terpolymer. LOTADER® 4210 is a versatile adhesive for extrusion coating or lamination, designed as: Concentrate to be used in dry blend with LDPE. LOTADER® 4210 improves adhesion of LDPE on aluminum foils, metallized or primerized films. Ready for use resin to be used pure. LOTADER® 4210 gives excellent adhesion on substrates likes aluminum foil, metallized plastics, paper, board, PE and some plastic films like BOPP. Coextrusion tie layer for PE/PA in extrusion coating process. LOTADER® 4210 can also be used as a coupling agent for mineral filled compounds such as halogen free flame retardant wires and cables, a compatibiliser for polyamide/polyolefin blends and a modifier for polyamides.

Licocene® PP MA 6452 granules are used in metal casting and hot melt adhesives. They offer excellent adhesion, good compatibility, heat resistance, improved cohesion, and anti-slip properties. It functions as an adhesion promoter, coupling agent, and release agent in industrial additives.