Products

DERTOPHENE® T 115 is a light-colored and low VOC terpene phenolic resin. It is compatible with various polymers and suitable for solvent based, hot melt adhesives.

AEROSIL® R 812 is a fumed silica after-treated with organosilane (HDMDS) with high specific surface and marked hydrophobia.

D.E.H.® 802 is a polyamine adduct waterborne curing agent with optimized rheology specially designed to provide superior performance in roller applications. It can be used with liquid Bisphenol A and/or Bisphenol F epoxy resins. It is supplied at 50 % solids in water.

GRANOLITE® P is a pentaerythritol ester of rosin, is a light-colored and deodorized resin suitable in various adhesive and road marking Hot Melt formulations.

SURFYNOL® DF-75 defoamer is an organic-based mineral oil-free additive designed to provide knockdown and sustained defoaming in a wide variety of water-based formulations. Performance benefits can be obtained when this product is incorporated into aqueous inks, overprint varnishes, coatings, adhesives and paper coatings. This compound is particularly useful for foam control in systems that are based upon acrylic resins.

DYNOL™ 604 is an acetylenic diol based super wetter providing very good static and dynamic surface tension reduction in waterborne coatings and inks.

DOP is still widely used as a plasticizer in selected applications where volatiles are less of an issue. It is also used as a hydraulic fluid and as a dielectric fluid in capacitors. DOP was the most widely used material as a plasticizer in manufacturing of articles made of PVC. Due to toxicity reasons, its usage has dropped and has been replaced by lower volatile phthalate and phthalate free products in some PVC and other applications.

VERSAL YELLOW 4G is a pigment used in flexography, gravure printing, letterpress, and offset lithographic printing. It is compatible with nitrocellulose and is designed to enhance color in various printing applications.

CLEAR-BLOC® 100 C is surface coated talc thet are produced from high purity ore to provide high brightness, clarity, low iron content, for use as an anti-block additive in LDPE and LLDPE film applications where blocking, greater polymer stability with improved optical properties are required. CLEAR-BLOC® 100 C is platy, hydrophobic, non-abrasive, and chemically inert and are approved for food contact applications. CLEAR-BLOC® 100 C is produced with a priority process grinding system to improve consistency and uniformity of the material. CLEAR-BLOC® 100 C is available in powder form and in a CS design which increases the bulk density from 12 lbs to 60+ lbd for feed systems requiring a quick mix and complete dispersion of the sized material while increasing the throughput of your line.

TEGO® Wet 251 is a highly active siloxane-based substrate wetting additive. It shows good substrate wetting properties and is suitable for a broad range of coatings. It is very compatible and recoatable.

D.E.R.® 667-20 is a high molecular weight "7-type" epoxy resin.

D.E.R.® 727 Epoxy Diluent is a p-tert.-butyl-phenyl glycidyl ether based reactive diluent.

Hostavin® 3315 disp. is a 52% aqueous dispersion of a benzotriazole UV absorber, designed for UV stabilization of paints and clearcoats. This sustainable UV absorber is characterized by its broad compatibility, high resistance to migration and low extraction, making it particularly suitable for wood and plastics coatings. Hostavin® 3315 DISP has been awarded with an EcoTain label resulting from its excellent toxicological profile.

Aluminium Paste 4660NS is a high-performance metallic effect pigment used to impart a reflective, metallic appearance in coatings and paints. It is a blend of various chemical compounds, making it ideal for use in decorative finishes and coatings where a metallic effect is desired. This product serves as both an effect pigment and a general pigment, creating a distinct visual appearance. It is widely used in applications such as automotive paints, decorative coatings, and industrial finishes.

D.E.H.® 445L cycloaliphatic polyamine hardener is used as curing agent for epoxy resin. It offers low tendency to yellowing when exposed to UV irradiation, low viscosity and long pot life.