Products

TPGDA-A is a difunctional reactive diluent with a branched alkyl polyether backbone. Polymerization occurs when TRIPROPYLENE GLYCOL DIACRYLATE is exposed to sources of free radicals. It is widely used as a primary diluent in the formulation of ultraviolet light (UV) and electron beam (EB) curable coatings and inks. TRIPROPYLENE GLYCOL DIACRYLATE is a grade of tripropylene glycol diacrylate with lower inhibitor content than the standard grade (TPGDA).

EMERAL EMRD161H is a silica coated aluminium paste with Methoxypropanol solvent.

TEGO® ViscoPlus 3010 is a pH independent, associative thickener with newtonian flow behavior. It is especially designed for high-shear thickening.

TEGO® DISPers 780 W is a polymeric, slightlyanionic wetting and dispersing additivefor high-quality water borne ink formulations. It is an excellent choice for resin-containing, resin reduced as well as resin-free grinds. TEGO® DISPers 780 W provides excellent pigment stabilization for organic and inorganic pigments.

Thetawet™ FS-8388 is an anionic surfactant and wetting agent used in home care applications such as bottle wash, degreasers, floor cleaners, and household cleaners. It is also used in industrial and institutional cleaning including bottle wash, degreasers, industrial cleaners, and precision cleaners. Additionally, it functions as a leveling agent and surfactant in industrial additives like wax emulsions.

REAFREE® 8506 NA is a binder and resin used in powder coating applications.

AERODISP® W 7520 Coating is a low viscosity, water-based dispersion of AEROSIL® fumed silica, with a slightly alkaline pH

CARPOL® GP-4520-55 is a glycerin-initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 4500 Da. This triol is polymerized with propylene oxide and then capped with 20% ethylene oxide. Main applications include C.A.S.E., however, CARPOL® GP-4520-55 may also be included as a component in other urethane products and formulations.

DERMULSENE® RE 1513 is an aqueous, solvent free resin based on stabilized rosin ester.

TEGO® AddBond 2220 improves flexibility and adhesion of solvent borne coatings. This soft polyester shows very good compatibility in non-polar formulations.

EBECRYL® 8807 is an aliphatic urethane diacrylate that exhibits rapid surface cure response, light color and moderate viscosity. Films of EBECRYL® 8807 cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, toughness, abrasion resistance, and are resistant to yellowing.

HFGEL 120-B12 is an organophilic clay designed for use in aromatic and polar systems such as those containing aromatic hydrocarbons, alcohols, ketones, glycol ethers, and esters. It does not require use of a chemical activator to reach optimal efficiency. HFGEL 120-B12 can be incorporated at any point in the manufacturing process using common processing equipment. HFGEL 120-B12 provides stable rheology and helps control sag and pigment settling.

REAFREE® 4763-S is a binder and resin used in coil coating and powder coating applications. It offers excellent flow, good mechanical properties, high gloss, high reactivity, outdoor durability, and reduced blooming.

CARPOL® PGP-4025-60 is a propylene glycol initiated polyether polyol. The resulting material has a functionality of two and an average molecular weight of 4000. This diol is polymerized with propylene oxide and then capped with 25% ethylene oxide. The outcome is a polyol with enhanced reactivity when compared to its counterpart Carpol® PGP-4000. Main applications include C.A.S.E., however, Carpol® PGP-4025 may also be included as a component in other urethane products and formulations.