Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Country of Origin
- Function
- Binder
- Product Code
- MITM12932
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Labeling Claims
Applications & Uses
- Adhesive & Sealant End Applications
- Compatible Polymers & Resins
- Product Applications and Usage Information
- Particularly recommended for pressure sensitive applications, contact adhesives and industrial adhesives.
- Designed specifically to tackify a wide range of acrylic, SBR and other water based synthetic or natural polymer.
- This dispersion performs high shear, high tack and excellent adhesion on various supports, even after ageing.
- Can be used with polychloroprene (PCP) dispersions to improve adhesion on specific surfaces with low energy.
Properties
- Physical Form
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Contains any chemicals listed on Prop 65 (including impurities, residues, catalysts, monomers, and by-products and excluding heavy metals)?
- Grade
Technical Details & Test Data
- Technical Data
DERMULSENE® RE 1513 gives good mechanical stability when properly formulated and handled.
Packaging & Availability
- Packaging Type
- Packaging Information
Available in 1 MT container, in polyethylene drums (220 kg) on pallets of 880 kg and in bulk.
Principal Information
- Group Principal Number
- S002297
- Principal
Storage & Handling
- Storage and Shelf Life Conditions
- Shelf Life - Shelf life up to 12 months under previous conditions.
- Handling Information -
- Keep away from freezing, DERMULSENE® RE 1513 containing no freeze, thaw stabilizers, coagulates irreversibly upon freezing.
- During the cold season shipments and storage are to be made in insulated carriers and tanks.
- We advise to avoid an extended storage at a temperature over 35°C.
- To prevent evaporation and subsequent formation of coarse particle, keep containers or drums closed.
- DERMULSENE® RE 1513 is always packaged through 50 microns filter before shipment.
Other
- Appearance (SDS)
- Solid, beige to white
- Insoluble in (SDS)
- Water
- Item Number
- Odor (SDS)
- Odorless
- Other Hazards
- Prolonged or repeated exposure to vapours/fumes generated by heating this product may cause respiratory irritation with throat discomfort, coughing or breathing difficulty.
- USA/DOT UN Number
- Not Applicable
- Chemical Properties
Value Units Test Method / Conditions pH 9.0 - at 20°C - Physical Properties
Value Units Test Method / Conditions Particle Size 280.0 nm nm Softening Point 76.0 °C °C base resin Viscosity 250.0 mPa.s mPa.s at 20°C, 50 min⁻¹ - Material Composition
Value Units Test Method / Conditions Solid Content 56.0 % % - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) 100.0 °C °C Flash Point (SDS) min. 200.0 °C °C Hardness (SDS) 2.5-3.5 moh moh Hardness (SDS) 2.5-3.5 moh moh Hardness (SDS) 2.5-3.5 moh moh Hardness (SDS) 2.5-3.5 moh moh Mohs scale Hardness (SDS) 2.5-3.5 moh moh Mohs scale Relative Density (SDS) 1.02 - at 20°C Specific Gravity (SDS) 4.0-4.3 - Viscosity (SDS) 50.0-600.0 mPa.s mPa.s At 20°C Volatile Organic Compounds (VOC) (SDS) 0.0 % % Directive 1999/13/EC Volatile Organic Compounds (VOC) (SDS) 0.0 % % Directive 1999/13/EC Volatile Organic Compounds (VOC) (SDS) 0.0 % % Directive 1999/13/EC Volatile Organic Compounds (VOC) (SDS) 0.0 % % Directive 1999/13/EC pH (SDS) 8.2-9.3 - at 20°C pH (SDS) 8.0-10.0 - 10% slurry pH (SDS) 8.0-10.0 - at 10% slurry in water pH (SDS) 8.0-10.0 - at 10% slurry in water pH (SDS) 8.0-10.0 - at 10% slurry in water