Products

CYMEL® 3020 resin is a highly alkylated, mixed ether (methyl/n-butyl) melamine crosslinker. Its hydrophobic nature combined with very good film appearance properties makes CYMEL® 3020 resin suitable for automotive topcoat applications. CYMEL® 3020 is insoluble in water but has excellent compatibility with water soluble backbone polymers and provides very good stability in pH buffered alkaline waterborne formulations.

ELVACE® 741 is a vinyl acetate-ethylene copolymer emulsion.

UCECOAT® 7510 is used in automotive OEM coatings, industrial coatings, paints and coatings markets. It cures by radiation and functions as a binder and resin.

EBECRYL® 248 functions as a binder and resin in CASE ingredients.

EBECRYL® 4510 is an isocyanate functional aliphatic urethane acrylate supplied at 90% solids in butyl acetate. It is useful as an adhesion promoter ultraviolet (UV) and electron beam (EB) energy curable coatings and in two-component dual cure coatings.

CRAYVALLAC® WW-1001 is a 40% active dispersion of polyethylene wax in water. The low viscosity and high active content of this dispersion, together with freedom from dust, assist the efficiency of manufacturing processes. CRAYVALLAC® WW-1001 provides the formulator with the means of controlling the frictional characteristics of a coating as well as enhancing its surface protection properties.

EBECRYL® 4101 is an undiluted aliphatic urethane acrylate designed for coatings on wood, cork, furniture, paper, parquet and film.

HP0145 - Water-Reducible Alkyd is a water-reducible short oil chain stopped alkyd dissolved in Glycol Ether EB and 2-Butanol (50/50). Based on Tall Oil Fatty Acids, this product may be reduced with water after appropriate neutralization with materials such as ammonia, triethylamine or DMEA. Baking enamel formulations can also be produced by adding appropriate amino resins.

Zinc Laurate SW - US is a low bulk density, fine white powder and a technical grade

HP9825 TOFA Short Oil Alkyd is a short oil, chain stopped alkyd resin based on tall oil fatty acid. It is formulated for air-dry enamels, spray paints, and baking enamels. It exhibits good overbake resistance (low yellowing)

ROPAQUE™ TH-2000AF Hollow Sphere Pigment is a pigment made from a styrene-acrylic copolymer, used as an industrial additive.

CYMEL® U-662 resin is a partially iso-butylated urea crosslinker supplied in a mixture of iso-butanol and xylene. CYMEL® U-662 resin has high reactivity and a high tendency for self-condensation providing fast drying films with good gloss, hardness and block resistance. CYMEL® U-662 resin is an excellent crosslinker for acid curing wood coating applications where low formaldehyde emission is required.

PARALOID™ B-60 100% Resin permits the manufacture of hard, heat-resistant coatings that exhibit fast tack-free time, rapid hardness development, and very good dry and wet adhesion to Plexiglas acrylic, ABS, and polystyrene plastics. It is recommended for use in lacquers for automotive plastics and in clear finishes for furniture plastics.

Bermocoll® EM 7000 FQ is a non-ionic, water soluble cellulose ether. It improves the consistency, the stability, and the water retention of water-based products.

UCECOAT® 2801 is an acrylated polyurethane dispersion in water designed for waterborne UV/EB curable inkjet inks. UCECOAT® 2801 is anionic in nature, making it compatible with water without any external emulsifier. Due to the presence of these ionic groups, it is not stable under highly acidic conditions. UCECOAT® 2801 contains no co-solvent. UCECOAT® 2801 exhibits good properties concerning the jetting and water resolubility before cure which are key requirements for inkjet application. UCECOAT® 2801 provides hardness in the polymerized coating along with good stain and chemical resistance.