Products

Cotin® 227 is a dibutyltin diacetate, a liquid organotin catalyst recommended for the manufacture of silicone and polyurethane systems. It can be used in these primary reactions as well as secondary types such as allophanate and biuret formation.

H.B. Fuller® PD-0431 is a carboxylated, surfactant stabilized acrylic emulsion polymer.

Wayncor™ 222 is a white, non-refractive, anti-corrosive pigment used in protective coatings. It is widely considered by the coatings industry to be a standard corrosion inhibitor. It exhibits a high degree of versatility and is compatible with almost all commercially available aqueous and solvent based coatings. The use level will vary depending upon resin system, pigment volume concentration and desired performance parameters, however typical use levels are between 3 - 10% total formula weight.

Thetawet™ FS-8020EB is an anionic surfactant and wetting agent used in fiber finishes, floor coatings, lacquers, and top coats. It is also used as a polish in industrial additives.

D.E.H.® 487 Epoxy Curing Agent is a low viscosity, modified cycloaliphatic polyamine based, curing agent for epoxy resins. Epoxy resin systems cured with D.E.H.® 487 Epoxy Curing Agent at temperatures above 10 °C show good early water resistance, making them an excellent choice for marine and floor applications, including epoxy primers and highly-filled, self-leveling floor coatings.

ELVACE® CPS-785 is a redispersible vinyl acetate-ethylene copolymer powder.

COMFORTSIL FLD HYDROSOFT is a medium viscosity silicone copolymer, based on our patented HALS (Hindered Amine Light Stabilising) technology.

D.E.R.® 664U Solid Epoxy Resin is a medium molecular weight solid reaction product of epichlorohydrin and bisphenol A. D.E.R.® 664U Epoxy Resin is a medium molecular weight solid epoxy resin used mainly in powder coatings. It can be incorporated in both decorative and functional coatings to provide improved viscosity characteristics and greater flexibility. D.E.R.® 664U Epoxy Resin can also be used for epoxy esters, with the addition of an appropriate catalyst.

SILCOLEASE™ PC-94 is an emulsion of Dioctyl Tin Dilaurate. This is the catalyst component of a silicone release formulation and promotes polymerization through a polycondensation reaction.

CARPOL® EDAP-770 is an ethylenediamine-initiated polyether polyol. The resulting material has a nominal functionality of four and a typical hydroxyl number of 770. This tetrol is polymerized solely with propylene oxide and is autocatalytic due to its amine content. This polyol’s functionality makes it optimal for use in rigid foams as a crosslinking modifier. In addition, CARPOL® EDAP-770 can also be used as a curative for most C.A.S.E. applications.

Corrostain™ 228 features a unique pigment chemistry which combines the dual functionality of Corrosion Inhibition and Tannin Stain Inhibition. This dual functionality aids in the reduction of raw material inventories and also provides effective inhibitor formulations. It is designed to provide good stability and performance in both solvent and water based systems. Typical use level is between 2 - 6% based upon total formula weight.

D.E.R.® 692H is a low molecular weight "2.5-type" epoxy resin with Flow modifier.

Silcolapse® 411 is a compound containing polydimethylsiloxane oil and a mineral filler in colloidal dispersion. It is intended mainly for treating anhydrous media, but also aqueous media, in numerous industries (oil, chemicals, metallurgy, etc.). Its low viscosity and its efficiency in alkaline media are of particular interest. Silcolapse® 411 is intended for industrial use only, and should not be used in the manufacture of foodstuffs, cosmetics or pharmaceutical products.

CRAYVALLAC® WS-4700 is a 40% active dispersion of polyethylene wax in isopropanol. The low viscosity and high active content of this dispersion, together with freedom from dust, assist the efficiency of manufacturing processes. CRAYVALLAC® WS-4700 provides the formulator with the means of controlling the frictional characteristics of a coating as well as enhancing its surface protection properties.

Stainban™ 185 is an aqueous tannin stain inhibitor additive for water based primers intended for wood protection. The unique mechanism of this product allows it to effectively block tannins in stains, clear coats, and pigmented coatings. It can be easily incorporated at any stage of the manufacturing process and is compatible with a wide range of surfactant and dispersants. Stainban™ 185 is effective at any PVC value of primers, however; it is more economical at higher PVC. It may reduce, or eliminate, the need for zinc oxide and stabilizing amines in primers. Paints made with StainbanTM 185 have good storage stability and improved humidity resistance. It is HAPS free and does not contribute to VOC. Typical use level ranges from 1 - 3% based upon total formula weight.