Products

3M™ Ceramic Microspheres W-410 are unique, semi-transparent, white-colored, fine particle size, high-strength microspheres. These products are typically used to reduce VOC levels, increase filler loadings, improve hardness and add burnish, scrub and abrasion resistance to a variety of coating formulations. Due to the ceramic chemistry of these products they are also UV transparent down to 250 nm and have utility in radiation-curable and thin-film powder coatings.

EBECRYL® 608 is a bisphenol A epoxy diacrylate diluted approximately 27% by weight with the reactive diluent OTA- 480, propoxylated glycerol triacrylate. EBECRYL® 608 exhibits light color and very fast cure response. Films of EBECRYL® 608 cured via exposure to ultraviolet light (UV) or electron beam (EB) demonstrate high surface hardness and gloss, low residual odor and excellent chemical resistance.

EBECRYL® 885 is a trifunctional polyester acrylate oligomer. Films of EBECRYL® 885 cured by ultraviolet light (UV) or electron beam (EB) exhibits high flexibility and excellent abrasion resistance. EBECRYL® 885 is recommended for parquet floor coating, wood furniture coating applications and flexible coatings for metal.

EBECRYL® 4654 is an aliphatic urethane acrylate supplied at 60% solids in n-butyl acetate. Films of EBECRYL® 4654 are physically dry after evaporation of the solvent. EBECRYL® 4654 exhibits high reactivity in ultraviolet (UV) and electron beam (EB) energy curable coatings and yields hard polymers. Coatings based on EBECRYL® 4654 demonstrate good exterior durability, resistance to yellowing, and chemical and mechanical resistance properties.

EBECRYL® 895 is a dipentaerythritol hexaacrylate belonging to the acrylics and acrylates chemical family. It functions as a monomer and oligomer in CASE ingredients.

Hostavin® 3326 disp. is a 52 % aqueous dispersion of a halogenated benzotriazole UV-absorber. It is characterized by its excellent compatibility and high efficiency in waterborne paints and varnishes, especially for protection of exterior wood coatings.

EBECRYL® 2221 is a hexafunctional aromatic urethane acrylate that provides very fast cure response when exposed to ultraviolet light (UV) or an electron beam (EB). Cured films of EBECRYL® 2221 exhibit good hardness and solvent resistance.

3M™ Glass Bubbles K20 are specially formulated to provide a high strength-to-weight ratio. This enhances survivability under demanding processing conditions, such as injection molding. These glass bubbles create stable voids, leading to low thermal conductivity and a low dielectric constant.

MAINCOTE™ IC-1002 is a hydrophobic acrylic-styrene copolymer with excellent flexibility and adhesion to metal substrates. This versatile binder can be combined with low thermal conductivity fillers to form waterborne thermal insulation coatings with high pigment volume concentrations (PVC), high volume solids and low VOC levels (< 25 g/L). MAINCOTE™ IC-1002 Emulsion offers uniform cure in high build insulation coatings.

CYMEL® 1125 resin is a highly methylated/ethylated, carboxyl-modified benzoguanamine crosslinker supplied in 2-butoxy ethanol. It is especially designed for electro-deposition primer formulations requiring excellent corrosion and detergent resistance. The structure of CYMEL® 1125 resin offers superior adhesion to metal substrates. CYMEL® 1125 resin can be used in a wide range of general purpose industrial finishes. However, because CYMEL® 1125 resin contains chelating groups which can form colored compounds with heavy metal ions such as iron and zinc, it is recommended for use in only dark single coat applications or primers, and not in pastel colors. Benzoguanamine resins have poor resistance to UV light, hence CYMEL® 1125 is not suitable for exterior applications

EBECRYL® 4266 is a Unsaturated aromatic epoxy acrylate. In the formulation of UV-curing and EB coatings. Without reactive thinner.

EBECRYL® P39 is a polymeric benzophenone derivative that functions as the photosensitizer in hydrogen abstraction type radical photoinitiator systems. EBECRYL® P39 has been designed for use in the formulation of UV coatings that exhibit little or no odor after curing. Recommended levels are from 8 to 10% based on total formulation. EBECRYL® P39 should be used in combination with amine co-initiators such as EBECRYL® P115 or EBECRYL® 7100, or with amine modified acrylate resins. EBECRYL® P39 is a polymer preparation manufactured in the European Union with (pre)registered monomers/reactants and REACH compliant.

RHOPLEX® 2500 is designed for tough, water-resistant masonry paints and primers. Coatings based on RHOPLEX® 2500 possess very good adhesion to masonry substrates, excellent durability (gloss and tint retention, and dirt pickup resistance), and the ability to retard efflorescence in cured cementitious products.

PARALOID™ A-21 100% Resin imparts excellent intercoat adhesion, hardness, and outdoor durability. It has the same composition and characteristics as the solution grade, while providing wider formulating latitude.

Thetawet™ FS-8150 is a nonionic surfactant used in caulks, home care applications such as bottle wash, degreasers, floor cleaners, and household cleaners, as well as in industrial and institutional cleaning including bottle wash, degreasers, and industrial cleaners.