Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Product Code
- MITM11345
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Labeling Claims
- Key Features
- Excellent flexibility
- Excellent pigment binding capacity
- Hydrophobic backbone composition offers good water resistance
- High film build without mudcracking
- Contributes to excellent corrosion resistance as part of a coating system
Applications & Uses
- Application Method
- Coating End Applications
- Compatible Substrates & Surfaces
- Markets
- Applications
- Product Applications
High performance, high film build, low VOC waterborne thermal insulation coatings for:
- Safe touch coatings for personnel protection
- Surface temperature reduction
- Thermal energy management for process control and/or energy conservation
- Improved management of corrosion under insulation (CUI) issues
- Use on hot and/or cold metal surfaces such as pipes, process equipment and storage tanks
- Easy application on surfaces with complex geometries needing insulation
Properties
- Physical Form
Regulatory & Compliance
- Certifications & Compliance
- Contains any chemicals listed on Prop 65 (including impurities, residues, catalysts, monomers, and by-products and excluding heavy metals)?
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S000005
- Principal
Storage & Handling
- Storage Conditions
- Store products in tightly closed original containers at temperatures recommended on the product label.
- Dispose in accordance with all local, state (provincial) and federal regulations. Empty containers may contain hazardous residues. This material and its container must be disposed in a safe and legal manner.
Other
- Appearance
- Milky white liquid
- Color (SDS)
- White milky
- Item Number
- Odor (SDS)
- Ammonia odor
- Other Hazards
- Not available
- USA/DOT UN Number
- Not Applicable
- Chemical Properties
Value Units Test Method / Conditions pH 9.4 - - Physical Properties
Value Units Test Method / Conditions Bulking Value 0.11 gal/lb Dry Bulking Value 0.115 gal/lb wet Density 8.7 lb/gal wet Film Forming Temperature 9.0 °C Viscosity max. 700.0 cPs at 25°C, spindle 2, 60 rpm - Material Composition
Value Units Test Method / Conditions Solid Content 50.0 % - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) 100.0 °C at 760 mmHg, water Evaporation Rate (SDS) max. 1.0 % Water Melting Point (SDS) 0.0 °C Water Relative Density (SDS) 1.2-100.0 - Water = 1 Relative Vapor Density (SDS) max. 100.0 - Air = 1, Water Vapor Pressure (SDS) 1700000.0 mm Hg At 20°C, Water Viscosity (SDS) 200.0-800.0 mPa.s Volatile Content (SDS) 48.0-50.0 % Water pH (SDS) 9.1-9.7 -