Products

SIPERNAT® 320 DS is a highly dispersible silica powder with high surface area, commonly used in coatings, adhesives, and sealants. It improves rheology, reduces viscosity, and provides enhanced flow properties. It is widely used in industrial and consumer goods applications for improving the performance and consistency of the final product.

EBECRYL® 4827 is an aromatic urethane diacrylate. Films of EBECRYL® 4827 cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, low color and good adhesion to various substrates.

APODIL 1000 is mono glycidyl ether of C12-C14 fatty alcohol. The product is used as reactive diluent for high viscosity epoxy resin.

D.E.R.® 3680-X90 is used in protective coatings and functions as a binder and resin in CASE ingredients.

ALCOTEX 975 is a chemical blend, including methanol and 2-butanol. It is a single-ingredient product primarily used as a crosslinking agent in various CASE (Coatings, Adhesives, Sealants, and Elastomers) applications.

HIKOREZ® H-2300 is light color thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins/diolefins and aromatic olefins derived from the process of thermal cracking of naphtha. The major usages are hot melt based pressure sensitive adhesive (HMPSA). And this grade also can be used as tackifier for hot melt adhesive (HMA), because of its good compatibility with base polymer such as EVA (Ethylene Vinyl Acetate), SIS (Styrene Isoprene Styrene).

SURFYNOL® SE-F is a self-emulsified surfactant that combines excellent wetting properties with good foam control and ease of incorporation in water borne coatings and inks.

EBECRYL® 3702 is a fatty acid modified bisphenol A epoxy diacrylate that exhibits outstanding flow and leveling and pigment wetting properties. Films of EBECRYL® 3702 cured by ultraviolet light (UV) or electron beam (EB) demonstrate high gloss, improved water resistance and good chemical resistance.

ACRYSOL™ RM-12W is a solvent-free, nonionic rheology modifier designed to offer high low-shear viscosity with an extremely shear thinning rheology and excellent thickening efficiency. Unlike conventional thickeners, ACRYSOL™ RM-12W offers excellent sag resistance with minimal effect on flow and leveling. While not capable of providing true thixotropy, it can offer advantages typical of thixotropes. These properties include improved brush/roller loading, good anti-drip properties, good in-can structure, and excellent flow/sag balance.

HP7279-Medium Oil Alkyd is a chain-stopped medium oil alkyd resin that is based on a blend of semi drying and drying oils. It is dissolved in Aromatic 100 for use in applications that require higher flashpoints.

COPRO® SP-490 is a multi-functional acrylic emulsion polymer.

EBECRYL® 4950 is an isocyanate-bearing aliphatic urethane acrylate diluted in 20 % butyl acetate. EBECRYL® 4950 can be combined with traditional hydroxyl (OH) functional binders or OH-acrylate functional binders, such EBECRYL® 4900, to form dual cure coatings (thermal NCO/OH and UV cure). EBECRYL 4950 improves crosslink density, reactivity, and imparts scratch, stain, and abrasion resistance after UV cure.

ACEMATT® OK 520 is a wax-treated, medium particle sized precipitated silica. Providing very high compatibility it can be used in a large variety of coatings.

EBECRYL® 811 is an ultraviolet light (UV) or electron beam (EB) curable polyester acrylate for either wet or dry offset printing on plastic substrates. Inks made using EBECRYL® 811 obtain excellent adhesion to calendered vinyl, polystyrene, polyolefins, polycarbonate and PVC. The water balance of this product allows inks based upon it to be run on press with low amounts of fountain solution: a key parameter for printing on non-absorbent substrates.

TEGO® ViscoPlus 3010 is a pH independent, associative thickener with newtonian flow behavior. It is especially designed for high-shear thickening.