Visit palmerholland.com
All Categories
All Categories
Products
4705
Brands
331
Documents
9410
Technologies
Markets
category
CASE
Products
Palmer Holland, Inc.
CASE
Browse
Applications
Show All 5 Categories
Additives
Resins & Binders
Monomers & Intermediates
Pigments & Colorants
Solvents & Carriers
Additives
Resins & Binders
Monomers & Intermediates
Pigments & Colorants
Solvents & Carriers
Principal
Applications
Functions
Chemical Family
Labeling Claims
End Uses
All Filters
2,396 Products
found on Palmer Holland, Inc.
 in
 CASE
Most Viewed
Palmer Holland, Inc.
TEGO® Wet 270
Principal:
Evonik Corporation Coating Additives
Functions:
Wetting Agent
Chemical Family:
Siloxanes
End Uses:
2K (2 component) Coating, Architectural Paints, Clearcoat, Pigmented Coating, Radiation Curable Coating, Solventborne Coating, Solventless & High Solids Coating, Waterborne Coating, Wood Coating
Labeling Claims:
Biocides-free, Conflict Minerals-free
TEGO® Wet 270 shows excellent anti-crater properties with flow promotion in waterborne, solvent borne, and radiation-curing coating
Palmer Holland, Inc.
CYMEL® UB-30-B
Principal:
allnex Crosslinkers
Functions:
Crosslinking Agent
Chemical Family:
Urea Formaldehyde (UF)
Compatible Polymers & Resins:
Acrylics, Alkyds, Cellulose Acetate Butyrate (CAB), Nitrocellulose, Polyesters, Polyvinyl Butyral (PVB)
End Uses:
Primer
CYMEL® UB-30-B resin is a n-butylated urea crosslinker supplied in n-butanol. Its fast film hardness development combined with excellent adhesion properties makes CYMEL® UB-30-B resin suitable for a wide range of industrial baking applications.
Palmer Holland, Inc.
CYMEL® 380
Principal:
allnex Crosslinkers
Functions:
Crosslinking Agent
Chemical Family:
Melamines
Compatible Polymers & Resins:
Acrylics, Alkyds, Epoxies (EP), Polyesters
End Uses:
Enamel, Surface Coating, Waterborne Coating
CYMEL® 380 resin is a partially methylated melamine crosslinker supplied in isobutanol and is a lower solids version of CYMEL® 370 resin. CYMEL® 380 resin is fast reacting and has a high tendency to self-condense resulting in films with high film hardness, gloss, chemical resistance and exterior durability. The high reactivity, combined with high solids content makes CYMEL® 380 resin suitable for a wide range of solventborne and waterborne industrial bake formulations.
Palmer Holland, Inc.
REAFREE® 8585
Principal:
Arkema Reafree Powder Resins
Chemical Family:
Polyesters
End Uses:
Powder Coating
Features:
Excellent Flow, Good Mechanical Properties, High Gloss, Improved Degassing, Outdoor Durability, Yellowing Resistance
REAFREE® 8585 is a binder and resin used in powder coating applications. It provides excellent flow, good mechanical properties, high gloss, improved degassing, outdoor durability, and yellowing resistance.
Palmer Holland, Inc.
TEGO® AddBond 2325
Principal:
Evonik Corporation Coating Additives
Functions:
Adhesion Promoter, Binder & Resin, Coupling Agent
Chemical Family:
Chemical Mixtures & Blends, Polyesters
End Uses:
Acrylic Coating, Printing Ink, Solventborne Coating
Compatible Substrates & Surfaces:
Metal, Plastics
Labeling Claims:
Conflict Minerals-free
Features:
Broad Compatibility, Corrosion Resistance, High Solid Content, Improved Flexibility, Improves Adhesion, Low Hardness, Reduces Viscosity
TEGO® AddBond 2325 improves flexibility and adhesion of solvent borne coatings. It is especially suitable for acrylic-based coating systems.
Palmer Holland, Inc.
Dynasylan® DAMO
Principal:
Evonik Corporation Silanes
Functions:
Adhesion Promoter, Adhesion Promoter, Adhesion Promoter, Crosslinking Agent, Sizing Agent, Surface Modifier, Surface Modifier
RTU Product Type:
Primer
Chemical Family:
Aminosilanes
Application Area:
Glass Surface, Metal Parts
Compatible Substrates & Surfaces:
Glass, Glass Fiber, Metal
Compatible Polymers & Resins:
Acrylates, Ethylene Vinyl Acetate (EVA), Polyamides, Polybutylene Terephthalate (PBT), Polycarbonates (PC), Polypropylenes (PP), Polyvinyl Acetate (PVA), Polyvinyl Chloride (PVC), Silicones
Dynasylan® DAMO is a diaminoÂfunctional silane which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers) and as a surface modifier. Dynasylan® DAMO is a colorless to slightly yellowish liquid with an amineÂlike odour which is soluble in alcohols and aliphatic as well as aromatic hydrocarbons.
Palmer Holland, Inc.
CARBOWET® GA-211
Principal:
Evonik Corporation Coating Additives
Functions:
Co-Dispersant, Grinding Aid, Wetting Agent
Chemical Family:
Chemical Mixtures & Blends
End Uses:
Waterborne Coating, Waterborne Paint, Wood Coating
Labeling Claims:
Conflict Minerals-free
Features:
Excellent Pigment Stability, Good Pigment Wetting, Good Substrate Wetting, Improved Deaeration
CARBOWET® GA-211 is a non-ionic grind aid for waterborne formulations. Focus on pigment wetting. Additionally helps deaeration of the millbase.
Palmer Holland, Inc.
CYCAT® XK 406 N
Principal:
allnex Crosslinkers
Functions:
Catalyst
Chemical Family:
Phosphoric Derivatives
End Uses:
Can Coating, Lacquers
Compatible Polymers & Resins:
Epoxies (EP), Phenolics
CYCAT® XK 406 N is a catalyst used in can coating and lacquer applications. It features high crosslinking and stain resistance, functioning as a catalyst in CASE ingredients.
Palmer Holland, Inc.
EBECRYL® 830
Principal:
allnex Radcure
Chemical Family:
Polyester Acrylates
End Uses:
Offset Ink
EBECRYL® 830 is a polyester hexa-acrylate that exhibits fast cure response and moderate viscosity. Films of EBECRYL 830 cured by ultraviolet light (UV) or electron beam (EB) demonstrate good abrasion and scratch resistance, solvent resistance and hardness.
Palmer Holland, Inc.
SILIKOFTAL® HTL 2/MPA
Principal:
Evonik Corporation Coating Additives
Chemical Family:
Polyesters
End Uses:
Coil Coating, Decorative Coating, Solventborne Coating
Compatible Substrates & Surfaces:
Aluminum, Metal, Steel
Features:
Excellent Adhesion, Good Compatibility, Heat Stable, Low Yellowing
SILIKOFTAL® HTL 2/MPA is a methoxy-functional silicone polyester resin
Palmer Holland, Inc.
AP 5555
Principal:
Admark Polycoats PVT LTD
Functions:
Curing Agent, Hardener, Hardener
Chemical Family:
Chemical Mixtures & Blends
End Uses:
Concrete Coating, Lacquers, Patching Compounds, Primer, Repair Mortar, Travelable Flooring
Applicable Processes:
Concrete Bonding
Labeling Claims:
Solvent-free
Features:
Chemical Resistance, Chemical Resistance, Fast Cure, Fast Curing, Low Viscosity, Low Viscosity, Room Temperature Curing, Room Temperature Curing
AP 5555 is a low viscosity, accelerated modified amidoamine hardener for epoxy resins based lacquers and coatings.
Palmer Holland, Inc.
TEGO® Addbond HS
Principal:
Evonik Corporation Coating Additives
Functions:
Adhesion Promoter, Binder & Resin, Coupling Agent
Chemical Family:
Chemical Mixtures & Blends, Polyesters
End Uses:
Plastic Coating, Solventborne Coating, Solventless & High Solids Coating
Compatible Substrates & Surfaces:
Aluminum, Galvanized Steel, Metal, Plastics, Steel
Labeling Claims:
Conflict Minerals-free, Styrene-free
Features:
Corrosion Resistance, High Solid Content, Improved Flexibility, Improves Adhesion, Improves Intercoat Adhesion, Low Hardness, Reduces Viscosity
TEGO® AddBond HS improves adhesion and flexibility of solvent borne coatings on steel, galvanized steel, aluminum, and plastics. It is highly suitable for high-solid coatings.
Palmer Holland, Inc.
AP 1062
Principal:
Admark Polycoats PVT LTD
Functions:
Curing Agent
Chemical Family:
Polyamides
AP 1062 is a polyamide-based curing agent derived from cashew nutshell liquid, polymerized with ethylenediamine and formaldehyde. This product is designed to act as a curing agent in various resin systems, particularly in the CASE (Coatings, Adhesives, Sealants, and Elastomers) industry. It is a single ingredient formulation that promotes the curing process in different applications.
Palmer Holland, Inc.
AP 1058 LT
Principal:
Admark Polycoats PVT LTD
Functions:
Hardener
End Uses:
Lacquers, Protective Coatings, Solventless & High Solids Coating
Compatible Polymers & Resins:
Polyamides, Polyamines
Features:
Acid Resistance, Alkali Resistance, Corrosion Resistance, Excellent Penetration, Good Adhesion Property, High Mechanical Stability, Low Temperature-Curing, Low Viscosity
AP 1058 LT is a low viscosity, reactive, light colour Phenalkamine hardener for epoxy resins based lacquers and coatings.
Palmer Holland, Inc.
MULTIWAX® 180-W Microcrystalline Wax
Principal:
Sonneborn Inc.
Chemical Name:
Paraffin Waxes and Hydrocarbon Waxes, Microcrystalline
INCI Name:
Microcrystalline Wax
Chemical Family:
Hydrocarbons, Microcrystalline Waxes
End Uses:
Candles, Hot Melt Adhesive
Physical Form:
Solid
Labeling Claims:
1,4-Dioxane-free, Acrylamide-free, Alkylphenol-free, Amine-free, Antibiotics-free, Asbestos-free, Benzene-free, Bisphenol A-free, Butylated Hydroxyanisole-free, Conflict Minerals-free, Dye-free, Ethylene Oxide-free, Ethylenediaminetetraacetic Acid (EDTA)-free, Formaldehyde Releasing Substances-free, Formaldehyde-free, Fragrance-free, Gluten-free, Glycerin-free, Glycol Ether-free, Glycol-free, Halogen-free, Iodine-free, Lactose-free, Lanolin-free, Latex-free, Melamine-free, Nanomaterials-free, No Artificial Sweeteners, Non-Genetically Modified Organism (GMO), Nut-free, Paraben-free, Per & Polyfluoroalkyl Substances (PFAS)-free, Perfluorooctane Sulfonate (PFOS)-free, Perfluorooctanoic Acid (PFOA)-free, Phenol-free, Phthalates-free, Polybutylene terephthalate (PBT)-free, Preservative-free, Sulfate-free, Surfactant-free, Talc-free
MULTIWAX® 180-W is a microcrystalline wax composed of paraffin and hydrocarbon waxes. It is used in fluids and lubricants, food and nutrition, healthcare and pharma, industrial, and personal care markets.
Show
15
of 2,396 results
1
...
83
84
85
...
160
