Products

MAINCOTE™ AE-58 is an aqueous acrylic emulsion copolymer which can be crosslinked with waterborne dispersions of epoxy resin in two-component acrylic/epoxy coatings. The resulting acrylic/epoxy coatings have properties such as low VOC, long pot life, and outstanding hardness, UV durability and solvent/chemical resistance. The high performance coatings can be used in a variety of interior and exterior applications for metal and concrete surfaces, such as institutional wall coatings and industrial metal primers, topcoats and direct-to-metal (DTM) coatings.

PARALOID™ A-21LV 30% Resin is a very hard methyl methacrylate polymer with enhanced adhesion properties. It is supplied as a 30% solution in a toluene/MEK/butanol solvent system. The polymer is also available in solid grade form. PARALOID™ A-21LV 30% Resin is similar to PARALOID™ A-21LV 30% Resin in characteristics and uses but because of its solvent system, PARALOID™ A-21LV 30% Resin possesses better compatibility with cellulosics, such as nitrocellulose and cellulose acetate butyrate. PARALOID™ A-21LV 30% Resin also will allow a higher solids content at spray viscosity.

PARALOID™ B-48S 45% Resin has excellent adhesion to bare and primed metals and possesses outstanding toughness, flexibility, and exterior durability. PARALOID™ B-48S 45% Resin Thermoplastic Solution Resin (45%) has excellent block resistance and fast solvent release, and it is well suited for both air-dried and force-dried finishes. It is supplied at 45% solids in toluene and is also available in a solid grade (PARALOID™ B- 48N Solid Grade Thermoplastic Acrylic Resin).

PARALOID™ B-67MT Resin is an alkyd-compatible acrylic resin designed to have good compatibility with long-oil alkyds. The addition of PARALOID™ B-67MT Resin to alkyds, oils, or varnishes produces coatings of improved hardness, faster drying speed, better color and gloss retention, and improved hold out and brushing characteristics.

PARALOID™ AU-608S Resin are acrylic polyols specifically designed to produce hard, resistant, durable coatings when reacted with aliphatic isocyanates. The exceptional properties of these coatings have led to increased use in such heavy duty maintenance applications as chemical plant storage tanks and offshore rigs and platforms.

MAINCOTE™ EC-11 is an acrylic polymer recommended for use in elastomeric coatings for industrial maintenance applications on both metal and cementitious substrates. When formulated as an anti-corrosive coating, MAINCOTE™ EC-11 Acrylic Emulsion can be applied to both clean and marginally-prepared rusty steel, and imparts excellent corrosion resistance, adhesion, low temperature flexibility and dirt pickup resistance. When applied to concrete surfaces, MAINCOTE™ EC-11 Acrylic Emulsion provides excellent resistance to blistering and the stresses imparted by thermal cycling. It is especially useful in applications where prevention of spalling and scaling of the concrete surface, caused by exposure to water and deicing chemicals, is required. The proper formulation and elastomeric nature of MAINCOTE™ EC-11 Acrylic Emulsion facilitates the production of coatings with excellent flexibility, very low VOC levels (< 50 g/L), and the ability to be applied in thick films (e.g., 10-20 mils dry) without sagging or mudcracking.

EBECRYL® 109 is an acrylate - methacrylate monomer blend, containing 50% of trimethylolpropane triacrylate (TMPTA) and 50% hydroxyethyl methacrylate (HEMA). It polymerizes when exposed to sources of free radicals. EBECRYL® 109 is particularly useful in coatings where a good thermal and/or chemical resistance are important.

ROYALE BLACK® PP131 is specially developed for plastics applications typically for PE, PP, PVC, EVA, PA6 and PA66 compounds for automotive, electronic, home appliance, footwear and film applications. Morphological properties of ROYALE BLACK® PP131 are balanced in such a way that it provides a good combination of dispersibility and color strength and it offers very good UV protection and smooth surface finish. It has high purity with very low sulfur, ash and exhibits low moisture absorption and it improves mechanical durability even at high temperature and direct sun light applications. ROYALE BLACK® PP131 is suitable for indirect food contact applications conforming to EC 10/2011 and recommended for all general purpose masterbatch, PVC masterbatch and direct compounding applications. ROYALE BLACK® PP131 is also recommended for water base and; solvent base ink applications.

AEROSIL® 300 is a hydrophilicfumed silica with a specific surface area of 300 m²/g. Itprovides a verystrong rheologicaleffect.

RHOPLEX® 57 is a binder and resin used primarily as a binder.

EBECRYL® 811 is an ultraviolet light (UV) or electron beam (EB) curable polyester acrylate for either wet or dry offset printing on plastic substrates. Inks made using EBECRYL® 811 obtain excellent adhesion to calendered vinyl, polystyrene, polyolefins, polycarbonate and PVC. The water balance of this product allows inks based upon it to be run on press with low amounts of fountain solution: a key parameter for printing on non-absorbent substrates.

EBECRYL® 3415 is a modified bisphenol A epoxy acrylate diluted with 40% 1, 6-hexanediol diacrylate (HDDA). This acrylated epoxy was developed for ultraviolet light (UV) curable screen printing, and exhibits excellent reactivity and good adhesion to various non-porous substrates. EBECRYL® 3415 meets all regulatory requirements and is no longer subject to the Significant New Use Rule (SNUR).

Orient Black® N762 is a low surface area, low structure semi reinforcing soft grade carbon black providing high resilience and excellent processing properties.

VERSAL SCARLET RT is a pigment used in wallcoverings and decorative laminates. It is compatible with nitrocellulose and is designed to enhance color in various decorative applications.