Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Country of Origin
- Product Code
- MITM04022
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Compatible Substrates & Surfaces
Properties
- Physical Form
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Contains any chemicals listed on Prop 65 (including impurities, residues, catalysts, monomers, and by-products and excluding heavy metals)?
Packaging & Availability
Principal Information
- Group Principal Number
- S000005
- Principal
Storage & Handling
- Storage Conditions
- Keep combustible and/or flammable products and their vapors away from heat, sparks, flames and other sources of ignition including static discharge.
- Processing or operating at temperatures near or above product flashpoint may pose a fire hazard.
- Use appropriate grounding and bonding techniques to manage static discharge hazards.
- Failure to maintain proper volume level when using immersion heaters can expose tank and solution to excessive heat resulting in a possible combustion hazard, particularly when plastic tanks are used.
- Store products in tightly closed original containers at temperatures recommended on the product label.
Other
- Color (SDS)
- Colorless clear
- IATA/ICAO Proper Shipping Name
- Resin solution
- IATA/ICAO UN Number
- UN1866
- IMO/IMDG Proper Shipping Name
- Resin solution
- IMO/IMDG UN Number
- UN1866
- Item Number
- Odor (SDS)
- Acid burnt odor
- Other Hazards
- Data not available
- TDG Canada Proper Shipping Name
- Resin solution
- TDG Canada UN Number
- UN1866
- USA/DOT UN Number
- Not Applicable
- Mechanical Properties
Value Units Test Method / Conditions Ultimate Hardness 11.0-12.0 KHN - Physical Properties
Value Units Test Method / Conditions Density 8.1 lb/gal At 25°C Flash Point 6.7 °C Pensky-Martens Closed Cup (PMCC) Glass Transition Temperature (Tg) 50.0 °C - Material Composition
Value Units Test Method / Conditions Solid Content 45.0 %(W/W) - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Autoignition Temperature (SDS) 480.0 °C Evaporation Rate (SDS) min. 1.0 % Butyl Acetate = 1 Flash Point (SDS) 7.0 °C Pensky-Martens Closed Cup (PMCC) Initial Boiling Point (SDS) 110.0 °C Toluene Lower Explosion Limit (SDS) 1.2 %(V) Melting Point (SDS) -95.0 °C Toluene Relative Density (SDS) 0.97 - Water = 1 Relative Vapor Density (SDS) 3.6 - air =1 Upper Explosion Limit (SDS) 7.1 %(V) Vapor Pressure (SDS) 22.0 mm Hg at 20 ℃ Viscosity (SDS) 6000.0-10000.0 mPa.s Volatile Content (SDS) 52.0-54.0 %