Products

EBECRYL® 7110 is an acrylated amine primarily used as a hydrogen donor, or photoactivator, in ultraviolet light (UV) curable coatings and inks. When used in formulations in combination with a photosensitizer (e.g. benzophenone), EBECRYL® 7110provides rapid UV cure response in air by mitigating the effects of oxygen inhibition at the coating or ink surface. Unlike conventional tertiary amines such as N-methyldiethanolamine, EBECRYL® 7110 reacts to become part of the UV cured polymer, resulting in lower residual odor and improved moisture resistance. EBECRYL® 7110 also promotes adhesion to plastic substrates and lowers viscosity when used as a primary component in UV adhesives and coatings.

3M™ Boron Nitride Cooling Filler Flakes 200-15 is a versatile ceramic material offering thermal conductivity, temperature stability, chemical resistance, high reflectivity, lightweighting and electrical insulation. The structure of layered hexagonal plates provides outstanding lubricating properties and is non-abrasive to tooling.

Dynasylan® MTES, an alkyltrialkoxysilane is an important component in sol­gel systems. Dynasylan® MTES is a colorless, low­viscosity liquid. Use requires acid­ or alkali­catalysed hydrolysis. Dynasylan® MTES is regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally Dynasylan® MTES contains a methyl group that adds organic character to the products. Hydrolysis leads to silanol groups which, in a subsequent condensation reaction, form very stable siloxane bonds (­Si­O­Si­). Condensation occurs parallel to hydrolysis once a certain amount of silanol groups have been formed. The absolute and relative rates of hydrolysis and condensation depends on a number of factors. The most important factors include pH, concentration, solvent, temperature and the catalyst.

EBECRYL® 151 is a pigment grinding vehicle for energy curable inkjet inks. When used in conjunction with EBECRYL® 151 (a letdown vehicle), jettable, stable inks are obtained for use in drop-on-demand piezo inkjet systems.

SUKOREZ® SU-210 is a light color thermoplastic resin obtained from polymerizing of C5/Cyclic and hydrogenation. The major usages are tackifier for hot meit adhesive(HMA), hot melt pressure sensitive adhesive (HMPSA) because of its good heat resistance and good compatibility with base polymers such as ethylene vinyl acetate(EVA), Styrene-Isoprene-Styene block copolymer(SIS).

TEGO® Foamex 835 is an extremely effective defoamer emulsion based on polysiloxane technology. Especially for pigmented and/or highly viscous formulations.

TEGO® Rad 2250 (Germany) is a broadly usable radically cross-linkable slip agent for clear coats. It provides efficient wetting, slip, and flow combined with very good compatibility.

SURFYNOL® SE-F is a self-emulsified surfactant that combines excellent wetting properties with good foam control and ease of incorporation in water borne coatings and inks.

TEGO® Foamex 800 is a very compatible defoamer emulsion based on polyether siloxane technology. Very easy to incorporate.

TEGO® VariPlus AP improvesgloss and adhesion on various metals (e.g. steel, aluminium). As a solvent-freeco-binder, it is recommended for high-solid industrial coatings and for UV-offset inks.

Aluminium Paste D451 RE is a high-performance metallic pigment paste designed for use in a variety of coatings. It consists of a blend of aluminum compounds and is formulated to provide exceptional metallic effects in coatings, inks, and paints. Known for its high dispersion stability, this paste is ideal for use in industrial and decorative coatings where durability and visual appeal are critical. It is commonly used in automotive coatings, industrial finishes, and other applications requiring metallic effects. This product is designed to deliver consistent performance and excellent color retention over time.

EBECRYL® 110 is a monofunctional reactive diluent characterized by low viscosity and relatively low odor. EBECRYL® 110 is used in ultraviolet light (UV) or electron beam (EB) cured coatings to control viscosity and increase flexibility.

HIKOREZ® H-2300 is light color thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins/diolefins and aromatic olefins derived from the process of thermal cracking of naphtha. The major usages are hot melt based pressure sensitive adhesive (HMPSA). And this grade also can be used as tackifier for hot melt adhesive (HMA), because of its good compatibility with base polymer such as EVA (Ethylene Vinyl Acetate), SIS (Styrene Isoprene Styrene).

TEGO® AddBond 2325 improves flexibility and adhesion of solvent borne coatings. It is especially suitable for acrylic-based coating systems.