Products

AP 1010 LT is a very low viscosity, reactive, light color, solvent free phenalkamine hardener for epoxy resins based lacquers and coatings.

ACRYSOL™ RM-244 is a solvent-free, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier based on proprietary Acid Suppression technology for an excellent balance of properties. This KU-building associative thickener offers formulators an excellent balance of sag resistance in tinted paints, flow and leveling, and gloss development for interior and exterior paints. ACRYSOL™ RM-244 also contributes ICI viscosity allowing the reduction of ICI builder concentration in most formulations.

EBECRYL® 3720-TP25 is the bisphenol A epoxy diacrylate, EBECRYL 3720, diluted 25% by weight with the reactive diluent tripropylene glycol diacrylate (TPGDA) (1) to provide a lower viscosity, easier handling product. EBECRYL® 3720-TP25 exhibits light color and fast cure response. Films of EBECRYL 3720-TP25 cured via ultraviolet light (UV) or electron beam (EB) demonstrate high gloss, surface hardness, and the superior chemical resistance typical of an epoxy resin.

TAMOL® 901 is a versatile, multi-purpose, low foaming polyacid pigment dispersant which offers outstanding performance in low sheen latex paint formulations. This polyacid dispersant provides excellent stability and color acceptance in formulations containing reactive pigments such as zinc oxide.

Polycin® M-365 is a solventless, castor oil-based derivative designed for use as a polyol or viscosity modifier in polyurethane coating systems. Polycin® M-3655 will impart higher hardness and strength, and as a reactive diluent, Polycin® M-365 provides VOC reduction along with the beneficial properties of castor oil derivatives, such as improved hydrophobicity, flow, and leveling.

CRAYVALLAC® PF is a modified micronised hydrogenated castor oil rheology modifier specially designed to facilitate the incorporation in powder form for betteractivation and easier handling. The activation process is the conversion of the CRAYVALLAC® PF fine particles to an interacting network of fibers. It is this network that gives rise to the final system’s shear thinning rheology. This shear-thinning behavior provides a very high viscosity under the low shear rates associated with sedimentation, and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application. CRAYVALLAC® PF is suitable for a multitude of applications.

Bayferrox® TAN 222 is an inorganic pigment belonging to the iron oxides chemical family.

NuTone® 313 is a general purpose carbon black. It has better jetness with good dispersibility. It is primarily designed considering the high jetness requirement for fertilizer coating, leather coating and printing inks applications.

Exolit® 855 is a proprietary mixture containing liquid partial phosphoric acid esters for intumescent transparent fire protection applications for wood. The clear liquid is fully soluble in water, non-hygroscopic and non-flammable.

DERCOLYTE® LTG is produced by polymerizing terpenes, is a low softening-point, low-volatile organic compound tacky resin. It is recommended to plasticize and to enhance adhesion of pressure sensitive adhesives.

EBECRYL® 152 functions as a monomer in CASE ingredients and is used in radiation cure applications.

D.E.H.® 586 is a curing agent used with epoxies (EP) in CASE ingredients.

Polycin® D-140 is a 100% solids, castor oil-based derivative designed for use as a polyol or reactive diluent in polyurethane systems. Polycin D-140, with its very low viscosity and secondary hydroxyl groups, will allow for the formulation of higher system solids with improved VOC reduction and longer pot-life. Polycin® D-140 will also impart the beneficial properties of castor oil derivatives, such as improved flow and levelling.

CYMEL® 385 Resin is a methylated high imino melamine resin with a low degree of alkylation. Being supplied in water, it is recommended as a crosslinking agent for hydroxyl-containing emulsion polymers and other aqueous systems containing hydroxyl or amide functionality. CYMEL® 385 Resin has a high tendency to self-condense and may be used to increase the hardness and resistance properties of thermoplastic waterborne polymers.

CYMEL® 5010 Resin is a partially n-butylated benzoguanamine resin supplied in a mixture of n-butanol and xylene and designed for solvent-based coatings. Like other benzoguanamine resins, CYMEL® 5010 Resin imparts excellent adhesion and chemical resistance to the coating, but without the need for an external catalyst in the formulation. Because of the limited light resistance properties of benzoguanamine, CYMEL® 5010 Resin is not suitable for exterior applications.