Enhanced TDS
Identification & Functionality
- CASE Ingredients Functions
- Chemical Family
- Function
- Curing Agent, Hardener
- Product Code
- MITM14675
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Labeling Claims
- Key Features
Epoxy coating systems cured with AP1010LT present the following features:
- Rapid cure at low temperature.
- High levels of mechanical stability.
- Good adhesion to marginally prepared surfaces.
- Resistance to aqueous alkaline, acid and saline solutions.
- Good corrosion resistance.
- Excellent penetration in damp concrete surfaces.
- Good edge retention of the coatings.
Applications & Uses
- Application Method
- Coating End Applications
- Compatible Substrates & Surfaces
- Markets
- Applications
- Product Applications
- AP 1010 LT is used in combination with liquid epoxy resins or solids epoxy resin solution or epoxy resin modified by means of reactive as well as non-reactive diluents. Suitable for making high solids and solvent free coating compositions with a workable wide range of pot lives.
- AP 1010 LT is suitable for application with standard one-component airless spray systems. Ideal for marine and protective coatings e.g , structural steel , concrete flooring etc.
Properties
- Physical Form
Regulatory & Compliance
- Contains any chemicals listed on Prop 65 (including impurities, residues, catalysts, monomers, and by-products and excluding heavy metals)?
Principal Information
- Group Principal Number
- S001795
- Principal
Storage & Handling
- Storage Conditions
- AP1010LT should be stored in a dry place, preferably in the sealed original container at temperatures 15°C to 30°C.
- AP1010LT should not be stored exposed to direct sunlight. Shelf life: (15°C to 30°C): 12 months.
- Hazardous decomposition products: (when in fire) carbon monoxide, carbon dioxide, nitrogen oxides and other toxic gases & vapors.
- Handling Information
- AP1010LT will absorb moisture and carbon dioxide when left in open containers. This may result in increased viscosity and sometimes crystallization.
- AP1010LT may shows fumes in presence of high humidity (>40% RH) and in acidic environment.
- Use personal protective equipments and follow industrial hygienic procedures.
- Recommended to use safety glasses, protective clothing, gloves, & masks suitable for chemical, solvents & their vapor.
Other
- ADR/RID/ADN Hazard Identification Number
- 80
- ADR/RID/ADN Proper Shipping Name
- Corrosive liquid, N.O.S.
- ADR/RID/ADN UN Number
- UN1760
- Appearance
- Clear yellow colored liquid
- Appearance (SDS)
- Clear
- Color (SDS)
- Yellow
- IATA/ICAO Emergency Response Guide
- 8L
- IATA/ICAO Proper Shipping Name
- Corrosive liquid, N.O.S.
- IATA/ICAO UN Number
- UN1760
- IMO/IMDG EmS Fire
- F-A
- IMO/IMDG EmS Spill
- S-B
- IMO/IMDG Proper Shipping Name
- Corrosive liquid, N.O.S.
- IMO/IMDG UN Number
- UN1760
- Insoluble in (SDS)
- Water
- Item Number
- Odor
- Amine
- Odor (SDS)
- Amine - like
- USA/DOT Proper Shipping Name
- Corrosive liquid, N.O.S.
- USA/DOT UN Number
- UN1760
- Optical Properties
Value Units Test Method / Conditions Color Scale max. 10.0 Gardner Color Scale max. 10.0 ASTM ASTM D1544 - Chemical Properties
Value Units Test Method / Conditions Amine Value 350.0-380.0 mg KOH/g ISO 9702 - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 12.0 mo - Physical Properties
Value Units Test Method / Conditions Density 0.98-1.0 kg/L ASTM D1475 at 25°C Dry to Set Time 3.0-4.0 hr BK Dry Time Recorder at 25°C Dry to Set Time 17.0-19.0 hr BK Dry Time Recorder at 5°C - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Flash Point (SDS) min. 100.0 °C Abel Method Specific Gravity (SDS) 0.98-1.01 - ASTM D1475 at 25°C Viscosity (SDS) 250.0-650.0 mPa.s ISO 12058 at 25°C