Products

EBECRYL® 4101 is an undiluted aliphatic urethane acrylate designed for coatings on wood, cork, furniture, paper, parquet and film.

HP0145 - Water-Reducible Alkyd is a water-reducible short oil chain stopped alkyd dissolved in Glycol Ether EB and 2-Butanol (50/50). Based on Tall Oil Fatty Acids, this product may be reduced with water after appropriate neutralization with materials such as ammonia, triethylamine or DMEA. Baking enamel formulations can also be produced by adding appropriate amino resins.

Zinc Laurate SW - US is a low bulk density, fine white powder and a technical grade

HP9825 TOFA Short Oil Alkyd is a short oil, chain stopped alkyd resin based on tall oil fatty acid. It is formulated for air-dry enamels, spray paints, and baking enamels. It exhibits good overbake resistance (low yellowing)

ROPAQUE™ TH-2000AF Hollow Sphere Pigment is a pigment made from a styrene-acrylic copolymer, used as an industrial additive.

TEGO® VariPlus DS 50 strongly improves the mechanical properties of waterborne inks and coatings. It also improves resistance against water, solvents, and chemicals. It leads to excellent adhesion on plastics and improves intercoat adhesion.

KRONOS® 1071 is a pigment with excellent whiteness, brightness, opacity, and tint strength. It is easy to disperse and used in enamel coatings, ceramics, paper & pulp, white concrete, printing inks, and fibers.

Ceridust® 1310 TP is a micronized rice bran wax based blend developed for industrial coatings and printing inks. Effective as for scratch and abrasion resistance.

CYMEL® U-662 resin is a partially iso-butylated urea crosslinker supplied in a mixture of iso-butanol and xylene. CYMEL® U-662 resin has high reactivity and a high tendency for self-condensation providing fast drying films with good gloss, hardness and block resistance. CYMEL® U-662 resin is an excellent crosslinker for acid curing wood coating applications where low formaldehyde emission is required.

PARALOID™ B-60 100% Resin permits the manufacture of hard, heat-resistant coatings that exhibit fast tack-free time, rapid hardness development, and very good dry and wet adhesion to Plexiglas acrylic, ABS, and polystyrene plastics. It is recommended for use in lacquers for automotive plastics and in clear finishes for furniture plastics.

Bermocoll® EM 7000 FQ is a non-ionic, water soluble cellulose ether. It improves the consistency, the stability, and the water retention of water-based products.

UCECOAT® 2801 is an acrylated polyurethane dispersion in water designed for waterborne UV/EB curable inkjet inks. UCECOAT® 2801 is anionic in nature, making it compatible with water without any external emulsifier. Due to the presence of these ionic groups, it is not stable under highly acidic conditions. UCECOAT® 2801 contains no co-solvent. UCECOAT® 2801 exhibits good properties concerning the jetting and water resolubility before cure which are key requirements for inkjet application. UCECOAT® 2801 provides hardness in the polymerized coating along with good stain and chemical resistance.

3M™ Boron Nitride Cooling Filler Platelets 012 P is a powders of highly crystalline boron nitride single platelets. Particle mean size ranges from 0.5 to 14 μm.

3M™ Glass Bubbles S38HS are high-strength polymer additives made from a water-resistant and chemically-stable soda-lime-borosilicate glass. These glass bubbles are designed for buoyancy and insulation in ultra-deep water applications in oil and gas drilling.The bubbles produce strong, stable voids and low thermal conductivity, helping coatings achieve the necessary compressive strength.