Products

AEROSIL® E 2000 is a single-ingredient organosilicon compound, specifically silica dimethyl silylate. It is compatible with silicone elastomers and is commonly used in toner applications. This product is designed to enhance the performance of various formulations, particularly in ink and toner products.

Superior Graphite 5590 is a purified synthetic graphite manufactured using Superior Graphite’s proprietary electro-thermal purification technology. This continuous high-temperature process exposes the raw materials to extremely high temperatures, so that impurities including inorganic contaminants are evaporated. Superior Graphite 5590 is an ultrafine grade within this product line produced using Superior Graphite’s dedicated milling and screening technology. Main uses are wear reduction and increase in thermal conductivity for high demanding applications.

COMFORTSIL CATA 2812 A1 is used in textile coating applications and is compatible with textile substrates and surfaces.

DOCCO 007 Gloss Oil is a 70% solids gloss rosin varnish dissolved in solvent naphtha. In comparison to DOCCO #006, DOCCO #007 Gloss Oil dries faster and to a higher hardness.

D.E.N.® 440 is a high functional epoxy novolac resin.

D.E.H.® 87 is a high molecular weight phenolic hardener based on an unmodified solid reaction product of liquid epoxy resin and bisphenol A.

D.E.H.® 598B is used as a curing agent for epoxy resins for rapid-set and low temperatures cure systems with high gloss and high strength. It results in a non-blushing product and has good water spot resistance and excellent chemical resistance. It can also be used as an accelerator for other hardeners in coatings and civil engineering applications.

Bayferrox® 130 BM is a single-ingredient inorganic pigment, known as Pigment Red 101. It is composed of iron(III) oxide. This pigment is commonly used for its color stability and durability in various applications.

CRAYVALLAC® SLW is a high performance micronized amide wax rheology modifier designed for manufacture of one component Silyl-Terminated-Polymer based adhesives and sealants, especially for highly filled systems (demanding applications, High-Tack systems for instance).

D.E.R.® 668-20 Solid Epoxy Resin is a high molecular weight solid reaction product of epichlorohydrin and bisphenol A. D.E.R.® 668-20 Solid Epoxy Resin is designed primarily for use in one pack stoving enamels in combination with heat-reactive cross-linking agents such as amino- and phenol- formaldehyde resins. D.E.R.® 668-20 Solid Epoxy Resin may also be used as binder in ambient curing systems in combination with isocyanate cross-linkers. Finishes made from D.E.R.® 668-20 Resin are suitable for metal decoration, interior and exterior can coatings, tube and drum linings, coil primers and many other industrial applications.

WANNATE® HDI is a liquid aliphatic diisocyanate. It is a colorless or pale yellow liquid with low viscosity.

Dynasylan® 9116 is a monomeric long-chain alkylfunctional silane. Dynasylan® 9116 is a clear colorless liquid and soluble in common non-polar organic solvents (e.g. petroleum ether,toluene). However its low volatility and viscosity make Dynasylan® 9116 an easy-to-handle additive. During the hydrolysis reaction between water and Dynasylan® 9116 a certain amount of methanol (VOC) is released.

Preventol® A 12-TK 48 is for the manufacture of aqueous and solvent formulations for preservation of wood composites, wood in above-ground and in ground applications, leather, films, glues, adhesives, and metalworking fluids.

TEGO® Foamex 825 is a compatible defoamer emulsion based on polyether siloxane technology. Good balance of effectiveness and compatibility.

Coscat® 83 is an organobismuth compound that was specifically developed as a catalyst for two component, polyurethane systems. For soft to medium hardness systems the addition of a zinc catalyst can reduce a potential lag in final cure, yielding a stronger final cure typical of a mercury-based catalyst.