Products

KRONOS® 2310 has outstanding optical properties and very high weather resistance in coatings.

TEGO® Rad 2500 is radically cross-linkable and imparts slip and defoaming properties to UV inks and coatings. First choice when formulating 'release' coatings and aiming for improvement of mechanical resistance.

Ceridust® 8170 M TP is a revolutionary PTFE free agent for powder coatings to create structuring effects in the powder coating formulation.

POLYGLYKOL B 01/240 is used in chemical manufacturing, equipment and parts, fluids and lubricants, leather manufacturing, metal manufacturing and finishing, paints and coatings, printing and inks, and textile manufacturing. It is applied in metal processing.

DERMULSENE® TR 602 is an aqueous, solvent free resin based on terpene phenolic resin.

WWT882193 Dark Gray is a pigment used in adhesives and sealants, and architectural coatings.

DERTOPHENE® T 115 is a light-colored and low VOC terpene phenolic resin. It is compatible with various polymers and suitable for solvent based, hot melt adhesives.

AEROSIL® R 812 is a fumed silica after-treated with organosilane (HDMDS) with high specific surface and marked hydrophobia.

D.E.H.® 802 is a polyamine adduct waterborne curing agent with optimized rheology specially designed to provide superior performance in roller applications. It can be used with liquid Bisphenol A and/or Bisphenol F epoxy resins. It is supplied at 50 % solids in water.

GRANOLITE® P is a pentaerythritol ester of rosin, is a light-colored and deodorized resin suitable in various adhesive and road marking Hot Melt formulations.

SURFYNOL® DF-75 defoamer is an organic-based mineral oil-free additive designed to provide knockdown and sustained defoaming in a wide variety of water-based formulations. Performance benefits can be obtained when this product is incorporated into aqueous inks, overprint varnishes, coatings, adhesives and paper coatings. This compound is particularly useful for foam control in systems that are based upon acrylic resins.

DYNOL™ 604 is an acetylenic diol based super wetter providing very good static and dynamic surface tension reduction in waterborne coatings and inks.

DOP is still widely used as a plasticizer in selected applications where volatiles are less of an issue. It is also used as a hydraulic fluid and as a dielectric fluid in capacitors. DOP was the most widely used material as a plasticizer in manufacturing of articles made of PVC. Due to toxicity reasons, its usage has dropped and has been replaced by lower volatile phthalate and phthalate free products in some PVC and other applications.

CLEAR-BLOC® 100 C is surface coated talc thet are produced from high purity ore to provide high brightness, clarity, low iron content, for use as an anti-block additive in LDPE and LLDPE film applications where blocking, greater polymer stability with improved optical properties are required. CLEAR-BLOC® 100 C is platy, hydrophobic, non-abrasive, and chemically inert and are approved for food contact applications. CLEAR-BLOC® 100 C is produced with a priority process grinding system to improve consistency and uniformity of the material. CLEAR-BLOC® 100 C is available in powder form and in a CS design which increases the bulk density from 12 lbs to 60+ lbd for feed systems requiring a quick mix and complete dispersion of the sized material while increasing the throughput of your line.