Products

ACRYSOL™ RM-825 Rheology Modifier is a nonionic urethane rheology modifier, designed for formulating interior/exterior paints ranging from highly structured to paints that portray nearly Newtonian behavior. ACRYSOL™ RM-825 Rheology Modifier rheology modifier shows a very good balance of flow and high shear viscosity. The nature of this balance is dependent on formulations and latex types. This allows the formulation of paints meeting a variety of rheological requirements. ACRYSOL™ RM-825 Rheology Modifier can be used as a co-thickener in many types of formulations for attaining a desired balance of low and high shear viscosities. It has excellent water and alkali resistance.

ACRYSOL™ RM-3030 Rheology Modifier is a solvent-free1, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier based on proprietary technology. This ICI-building associative thickener offers formulators efficient ICI contribution with minimal mid-shear rheology response. ACRYSOL™ RM-3030 Rheology Modifier has demonstrated improved syneresis resistance in broad formulation latitude. ACRYSOL™ RM-3030 Rheology Modifier should be added under good mixing conditions to ensure complete incorporation into the formulation.

TAMOL® 1124 is a high performance hydrophilic copolymer which offers outstanding performance in a wide range of latex paint formulations from high gloss enamels to low sheen flats. Designed for excellent stability and compatibility with modern latex paint additives, TAMOL® 1124 dispersant is an excellent choice for the modern paint formulator.

RHOPLEX® 2601 is a versatile binder designed for interior and exterior coatings and can be formulated across a broad PVC range. For exterior durability, higher coalescent levels may be needed to ensure good film formation in higher PVC paints. While RHOPLEX® 2601 is a harder latex binder, it should be noted that it is possible to develop low VOC paints with the use of low VOC coalescents (i.e. DOWANOL™ LoV 485 Glycol Ether, Optifilm 400, etc.).

RHOPLEX® CL-106 acrylic emulsion has been designed for use in factory-applied clear topcoats for wood requiring the highest levels of appearance and surface hardness characteristics. Lacquers based on RHOPLEX® CL-106 acrylic emulsion are translucent in the can and upon application turn clear very rapidly while drying. RHOPLEX® CL-106 acrylic emulsion was developed for use in topcoat finishes and as such does not provide optimum appearance qualities if used as a sealer. In multi-coat systems, the finest overall appearance is obtained when RHOPLEX® CL-106 acrylic emulsion is used over specialized sealer formulations. It is recommended that RHOPLEX® CL-106 acrylic emulsion be used over sealers formulated from RHOPLEX® CL-105 emulsion. In this manner, RHOPLEX® CL-105 emulsion contributes excellent wood fiber wetting, appearance characteristics, and early sandability to the system while RHOPLEX® CL-106 emulsion provides a topcoat with hardness, mar resistance, and clarity. The volatile organic content (VOC) of typically formulated clear topcoat lacquers is less than 2.3 lb/gal and hazardous air pollutants (HAPs) are 0.3 lb HAPs/lb solids.

TAMOL® 960 is a versatile, low-cost, non-foaming, water-soluble polyacid dispersant which offers excellent performance in a wide range of latex paint formulations. It is recommended for low sheen flat through semi-gloss acrylic, stirene-acrylic and vinyl acrylic formulations and is effective over a pH range of 7 to 11 with a wide temperature range. TAMOL® 960 offers good compatibility with ZnO pigment.

Bayferrox® 3910 LV is an iron oxide yellow pigment, also known as ferric oxide yellow. It is a single-ingredient product used in various applications requiring pigment and colorant properties.

ACRYSOL™ I-62A Emulsion is an aqueous alkali-soluble acrylic copolymer which has broad utility as a dispersant for organic and inorganic pigments. As a pigment dispersant, it offers excellent dispersion for whites and a variety of deep-tone formulations. It is especially useful in formulations designed for thermosetting applications. It is a waterborne colloidal dispersion containing both carboxylic acid and hydroxyl functionality, and as such will crosslink with melamine-formaldehyde or urea-formaldehyde resins, thereby becoming part of the polymer matrix and improving the film properties.

ACRYSOL™ WS-24 is a dispersant composed of a chemical mixture.

S-01A is used in powder coating applications. It offers features such as good compatibility, enhanced surface feeling, improved chargeability, better film hardness, and a sand texture.

HYDROGRAL® is a hydrogenated rosin. The hydrogenation of rosin improves stability (ageing, UV resistance).

ALPATE F 798 is a solvent-based chemical mixture used primarily in packaging applications. It is composed of mineral spirit, solvent naphtha (light aromatic), and other solvent-based components. This product is designed to provide optimal performance in packaging processes, offering key characteristics suitable for various packaging materials.

Aluminium Paste MS-750 is a high-quality metallic effect pigment designed to provide excellent reflectivity and metallic finishes in coatings. It is used primarily in applications requiring vibrant, durable metallic effects.