Products

AP 5685 is low viscosity, modified aliphatic amine adduct hardener for epoxy resins based lacquers coatings.

DERMULSENE® DP 1601 is an aqueous, solvent free resin based on stabilized rosin ester.

CRAYVALLAC® LA-250 is a modified urea dissolved in DMSO and is a pourable liquid rheology modifier for post addition to low polarity solvent based coatings. CRAYVALLAC® LA-250 should be added to the coating as a slow stream under low to medium shear conditions to ensure sufficient dispersion. Although efficient stirring is required to ensure homogeneity, elevated temperatures are not required for activation and the use of excessive shear should be avoided.

WC-30005 Phthalo Blue GS is used in decorative coatings. It features excellent stability, high color strength, and low viscosity. It functions as a pigment in CASE ingredients.

VANCRYL® 937 is a medium glass transition temperature acrylic emulsion for the graphic arts industry. Excellent gloss can be obtained by utilizing VANCRYL® 937 in inks and coatings. Its film formation properties, coupled with its rapid water release, result in very fast drying. It is suitable for both flexographic and gravure printing on paper substrates. VANCRYL® 937 has excellent compatibility with pigment dispersions and alcohols. Inks formulated with VANCRYL® 937 have good transfer, printability, and resolubility for high-quality printing on various paper substrates (including metalized paper) and aluminum foil. VANCRYL 937 can also be formulated as a high gloss OPV that will very quickly develop water, oil, and scuff resistance.

EBECRYL® 4250 is an undiluted isocyanate functional urethane acrylate designed for use as an adhesion promoter in UV/EB coatings and in two component dual cure systems for coatings on wood, plastic and metal.

RHOPLEX® VSR-5102C is a 100% acrylic binder engineered for low-VOC interior and exterior semi-gloss to flat coatings. RHOPLEX® VSR-5102C can be formulated with minimal or no coalescent. RHOPLEX® VSR-5102C provides an optimal balance of abrasive scrub resistance and stain removal, along with excellent exterior durability and dirt pick-up resistance. This facilitates the formulation of high-quality, low-VOC, and low-odor interior and exterior paints. RHOPLEX® VSR-5102C contains no intentionally added alkylphenol ethoxylates (APEO) or per and polyfluoroalkyl substances (PFAS).

AP 6400 A60 is a moderate viscosity new low free amine technology Ketamines dissolved in acetone.

EMERAL EMR D161 is an effect pigment and pigment used in coatings, specifically for metallic paints.

EBECRYL® 445 is a reactive chlorinated polyester resin diluted 40% with the reactive diluent trimethylolpropane triacrylate (TMPTA)(1). EBECRYL 445 is not based on bisphenol A raw materials, and is tin-free. EBECRYL 445 exhibits good lithographic behavior and pigment wetting properties, and fast cure response in ultraviolet light (UV) curable coatings and inks. Cured films of EBECRYL 445 display good adhesion to metals, and paper.

CYMEL® NF 3030 Resin is a formaldehyde-free crosslinking agent supplied in water. It was designed primarily for use in 2 component, ambient or forced cure, water-borne conversion varnishes for industrial wood when formulated with VIACRYL® SC 6834w/42WA amine-free acrylic emulsion. Resulting formulas exhibit superior catalyzed pot life relative to isocyanate-based conversion varnishes. The resulting coatings have excellent appearance, early hardness, resistance properties, and hot/cold cycle flexibility.

AP 1040 is a low viscosity, reactive, phenalkamine hardener for epoxy resin based lacquers and coatings.

HP7279 Medium Oil Alkyd is a chain-stopped medium oil alkyd resin that is based on a blend of semi drying and drying oils. It is dissolved in Aromatic 100 for use in applications that require higher flashpoints.

EBECRYL® 303 is a polymeric resin diluted 45% with the monomer 1,6-hexanediol diacrylate (HDDA)(1). This material is designed to be used alone or in combination with other UV/EB curable oligomers to provide improved adhesion of inks and coatings on plastic substrates.