Products

HYDROGRAL® G5 is a glycerol ester of partially hydrogenated rosin. It shows a low acid value and an excellent resistance to oxidation. It is specially recommended for the formulation of chewing gum base.

EBECRYL® 450 is a fatty acid modified polyester hexaacrylate. Because of the special structure of the backbone and the high acrylic functionality, EBECRYL® 450 provides the proper hydrophilic-lipophilic balance necessary for lithography, combined with high reactivity when cured by ultraviolet light (UV) or an electron beam (EB). Lithographic inks based on EBECRYL® 450 display outstanding printing qualities, including excellent ink transfer, good dot definition, and proper tack and rheological properties.

Bleumina® 219 is a series of Medium/High Color Furnace (MCF/HCF) blacks that provide excellent esthetics, along with high durability, in the final product. With very low particle size and a balance of structure, it exhibits good UV protection, high jetness, and gloss.

Bleumina® 361 is a series of Medium/High Color Furnace (MCF/HCF) blacks that provide excellent esthetics, along with high durability, in the final product. With very low particle size and a balance of structure, it exhibits good UV protection, high jetness, and gloss.

Superior Graphite LBG8004 is a purified flake product manufactured using Superior Graphite’s proprietary electro-thermal purification technology. This continuous high-temperature process exposes the flake graphite to extremely high temperatures so that impurities, including inorganic contaminants, are sublimed. Superior Graphite LBG8004 is the ultra fine size grade of the ‘Thermally Purified Flake’ product line produced using Superior Graphite’s dedicated milling and screening technology.

TEGO® Wet 510 is a silicone-free substrate wetting additive with good substrate wetting properties. It is highly recommended for waterborne coatings with dynamic applications.

Bermocoll® E 230 FQ is a non-ionic, water soluble cellulose ether. It improves the consistency, the stability, and the water retention of water based products.

Bayferrox® 3905 is an iron oxide yellow pigment, also known as ferric oxide yellow, and is categorized as Pigment Yellow 42. It is a single-ingredient pigment primarily used in plastics and elastomers.

Bleumina® 221 is a series of Medium/High Color Furnace (MCF/HCF) blacks that provide excellent esthetics, along with high durability, in the final product. With very low particle size and a balance of structure, it exhibits good UV protection, high jetness, and gloss.

Licocene® PP 1502 fine grain is a low melting, metallocene-technology based propylene-ethylene copolymer, which exhibits a low degree of crystallinity.

EBECRYL® 8210 is an aliphatic urethane acrylate that exhibits low viscosity and high reactivity in ultraviolet (UV) light or electron beam (EB) curable coatings. Cured films of EBECRYL® 8210 demonstrate high hardness with good scratch, abrasion and chemical resistance. EBECRYL® 8210 also contains primary hydroxyl groups that can be utilized for dual cure polymerization. Dual cure can provide instantaneous tack-free coating surfaces via UV or EB exposure while reaction of the hydroxyl groups with a suitable isocyanate enables polymerization in regions of the coating where UV or EB energy exposure is insufficient or absent.

SharkDISPersion SX™ is a binder and resin used in plastics and elastomers for artificial grass and carpet applications. It provides good anti-static properties and UV resistance.

REAFREE® 5700 is a saturated carboxylated polyester for combination with Triglycidylisocyanurate or with ß-Hydroxyalkylamide type hardeners. Suitable for the formulation of outdoor superdurable and protective thermosetting powders. TMA free type.