Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Function
- Monomer
- Product Code
- MITM00436
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Performance Highlights
EBECRYL® 8210 is characterized by:
- Low viscosity
- Light color
- Excellent reactivity
- Dual functionality
UV/EB cured products containing EBECRYL® 8210 are characterized by the following performance properties:
- High gloss
- Good scratch and abrasion resistance
- Chemical resistance
- Low yellowing
- Adhesion
The actual properties of UV/EB cured products also depend on the selection of other formulation components such as reactive diluents, additives and photoinitiators.
Applications & Uses
- Application Method
- Coating End Applications
- Cure Method
- Product Applications
Formulated UV/EB curable products containing EBECRYL® 8210 may be applied via direct or reverse roll, offset gravure, metering rod, slot die, knife over roll, air knife, curtain, immersion, spin and spray coating methods. EBECRYL® 8210 is recommended for:
- Coatings requiring high scratch/abrasion resistance and improved adhesion
- A modifying oligomer to increase cure speed, solvent resistance and abrasion resistance.
- Dual cure coating systems.
Properties
- Physical Form
Packaging & Availability
Storage & Handling
- Storage Conditions
- Care should be taken not to expose the product to high temperature conditions, direct sunlight, ignition sources, oxidizing agents, alkalis or acids. This might cause uncontrollable polymerization of the product with the generation of heat.
- Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers. Procedures that remove or displace oxygen from the material should be avoided. Do not store this material under an oxygen free atmosphere.
- Dry air is recommended to displace material removed from the container. Wash thoroughly after handling. Keep container tightly closed. Use with adequate ventilation.
Other
- Appearance
- Clear liquid
- Appearance (SDS)
- Liquid
- Color (SDS)
- Clear to light yellow
- Group Principal Number
- S000001
- IATA/ICAO Proper Shipping Name
- Environmentally hazardous substance, liquid, N.O.S.
- IATA/ICAO Technical name (N.O.S.)
- Acrylated resin
- IATA/ICAO UN Number
- UN3082
- IMO/IMDG Proper Shipping Name
- Environmentally hazardous substance, liquid, N.O.S.
- IMO/IMDG Technical name (N.O.S.)
- Acrylated resin
- IMO/IMDG UN Number
- UN3082
- Insoluble in (SDS)
- Water
- Item Number
- Odor (SDS)
- Ester acrylate
- Other Hazards
- Contact with skin may cause a cross-allergic reaction in persons already sensitized to acrylates ., Polymerization may occur from excessive heat , contamination or exposure to direct sunlight .
- Principal
- TDG Canada Proper Shipping Name
- Environmentally hazardous substance, liquid, N.O.S.
- TDG Canada Technical name (N.O.S.)
- Acrylated resin
- TDG Canada UN Number
- UN3082
- USA/DOT Proper Shipping Name
- Environmentally hazardous substance, liquid, N.O.S.
- USA/DOT Technical name (N.O.S.)
- Acrylated resin
- USA/DOT UN Number
- UN3082
- Optical Properties
Value Units Test Method / Conditions Color Scale max. 2.0 Gardner Gardner Gardner Color Scale - Chemical Properties
Value Units Test Method / Conditions Acid Value max. 8.0 mg KOH/g mg KOH/g Hydroxyl Value 75.0-110.0 mg KOH/g mg KOH/g - Mechanical Properties
Value Units Test Method / Conditions Elongation 2.1 % % at break, UV cured 125 μm thick films Tensile Modulus 379000.0 psi psi UV cured 125 μm thick films Tensile Strength 6400.0 psi psi UV cured 125 μm thick films - Physical Properties
Value Units Test Method / Conditions Density 1.11 g/mL g/mL At 25°C Glass Transition Temperature (Tg) 68.0 °C °C Dynamic Mechanical Analysis (DMA) Viscosity 2750.0-5250.0 cPs cPs At 25°C - Material Composition
Value Units Test Method / Conditions Isocyanate Content max. 0.02 % % - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) min. 100.0 °C °C Density (SDS) 1.1 g/cm³ g/cm³ Flash Point (SDS) 223.0 °C °C Vapor Pressure (SDS) max. 1.33 hPa hPa at 20°C Volatile Content (SDS) max. 0.5 % %