Products

CRAYVALLAC® WN-1110 is a micronised modified polypropylene wax.

H.B. Fuller® PD-1202 is a binder and resin used in waterborne adhesives for adhesives and sealants.

Wayncor™ 213 is a general purpose corrosion inhibitive pigment which demonstrates good stability and corrosion resistance in a wide variety of systems. Typical use level is between 3 - 7% total formula weight.

D.E.R.® 6116 Solid Epoxy Resin is a low molecular weight, solid reaction product of epichlorohydrin and bisphenol A. D.E.R.® 6116 Solid Epoxy Resin is a standard, low molecular weight, solid epoxy resin which has been developed for use in powder coatings where it provides excellent flow in standard as well as in low temperature cure systems. D.E.R. 6116 Resin can be used in both epoxy and epoxy/polyester powder coating applications to improve mechanical and chemical resistance properties. D.E.R.® 6116 Solid Epoxy Resin offers, as standard, a lower epoxide equivalent weight and viscosity than D.E.R. 662E Solid Epoxy Resin. D.E.R.® 6116 Resin is suggested for use in applications in which D.E.R.® 662E Resin does not provide adequate flow.

COPRO® SP-480 is a styrene acrylic copolymer emulsion.

D.E.H.® 55 Epoxy Curing Agent is a medium viscosity modified aliphatic polyamine curing agent. D.E.H.® 55 Epoxy Curing Agent is extremely reactive with liquid epoxy resins at room temperature and is used in maintenance paints, 2 pack adhesives, civil engineering, castings and hand lay-up laminates.

D.E.H.® 26 Curing Agent is an economical liquid aliphatic polyamine hardener, tetraethylenepentamine (TEPA), that offers a short pot-life and cures in minutes with standard unmodified liquid epoxy resins. Similar to D.E.H.® 24 Epoxy Curing Agent in application, it provides lower vapor hazard to workers due to its higher boiling point. D.E.H.® 26 Epoxy Curing Agent is used for maintenance paints, the manufacture of epoxy-amine adducts, in adhesives, and civil engineering applications. It is also used as an accelerator for polyamide curing agents. In electrical applications, D.E.H.® 26 Curing Agent is used for casting, potting and encapsulation.

REAFREE® 6818 is a binder and resin used in paints and coatings.

CARPOL® NIONIC™ 1100 is a blend of polyethers, primarily glycerol ethoxylated propoxylated and polyalkylene glycol. It functions as a nonionic surfactant.

CARPOL® PGP-2000-60 initiated polyether polyol. CARPOL® PGP-2000-60 has a functionality of two and an average molecular weight of 2000. This diol is polymerized solely with propylene oxide for controlled reactivity.

CARPOL® EDAP-800 is an ethylenediamine-initiated polyether polyol. The resulting material has a nominal functionality of four and a typical hydroxyl number of 800. This tetrol is polymerized with ethylene and propylene oxides and is autocatalytic due to its amine content. This polyol’s functionality makes it optimal for use in rigid foams as a crosslinking modifier. In addition, CARPOL® EDAP-800 can also be used as a curative for most C.A.S.E. applications.

Waynflash™ 111 is a liquid flash rust inhibitor which contains sodium nitrite as part of its flash rust inhibition matrix. It is a highly effective inhibitor for the flash rusting on ferrous substrates during aqueous paint phase. It has also proven to be affective in preventing in can rusting. Typical used levels range from 0.25 - 1.0% max. based upon total formula weight. It is highly versatile and can be used in any water based systems. WaynflashTM 111 exhibits good paint stability and can be incorporated at any stage of paint manufacturing. It is both HAPS and APEO free.

COPRO® CP-501 is a non-ionically stabilized, carboxylated styrene-butadiene copolymer latex that contains a non-staining antioxidant.

Hybricor™ 204 is an organic/inorganic hybrid corrosion inhibitor pigment, a proven effective replacement for Cr⁶⁺ in aerospace primer applications on aluminum and other non-ferrous substrates. The fine particle size of Hybricor™ 204 (7 Hegman) permits it to be easily incorporated into a coating using a high speed disperser. It is effective in primers, DTM and thin film (20 micron) applications. It does not affect pot life of 2K systems.

REAFREE® 5706 is a binder and resin used in paints and coatings, specifically for varnish applications. It offers excellent flexibility, high gloss, and outdoor durability.