Products

PURMOL™ 4ST is a sodium (Na) type A zeolite with a pore size of approximately 4 Angstroms (0.4 nm). PURMOL™ 4ST is recommended for use with high quality coatings. In general, we recommend the addition of 2.5% - 5% Purmol powder to the polyol component. This must be stirred thoroughly for a minimum of two hours to allow the Purmol to adsorb all the water before addition of the isocyanate. With metal dust coatings we recommend the addition of 0.5% - 2% PURMOL™ 4ST powder.

Dynasylan® SIVO 160 is a water­borne storage stable silane based sol­gel system for the formulation of inorganic surface treatment primers. As part of the SIVO® SOL Technology, it features all the benefits of the other well established products of this series. These are the absence of heavy metals, fluorides, and solvents. It is designed to have a low volatile organic content. Due to its polymeric nature, it is characterized by a high reactivity. This is demonstrated by its extraordinary low curing temperature of 20 to 80 °C which represents a major breakthrough for water­borne sol­gel systems. Dynasylan® SIVO 160 is a clear to slightly opaque, colorless to slightly yellow, low viscosity liquid.

DERTOL® 85 is a mixture of terpene alcohols and hydrocarbons. DERTOL® 85 is characterized by its high content in terpene alcohols, mainly terpineol isomers.

PARALOID™ B-64 100% Resin can be dissolved in toluene, xylene, selected esters, acetone, and methyl ethyl ketone. PARALOID™ B-64 100% Resin is not soluble in most alcohols and aliphatic hydrocarbons as the sole solvent. Please contact your sales person for additional information about the solvent compatibility of PARALOID™ B-64 100% Resin. It is well suited for a variety of applications, including treated metal, copper, zinc, brass, treated aluminum, concrete floors, and certain plastics.

PARALOID™ B-44 100% Resin provides an outstanding combination of hardness, flexibility, and adhesion to various substrates. It also permits wider latitude in formulating in solvents that are suitable for specific applications. The resin is slightly softer and more flexible than PARALOID A-21 Solid Grade Thermoplastic Acrylic Resin and has excellent adhesion to various substrates.

PURMOL™ 3ST is a potassium (K) type A zeolite with a pore size of approximately 3 Angstroms (0.32 nm). Purmol 3ST is recommended for use with high quality coatings. In general, we recommend the addition of 2.5% - 5% Purmol powder to the polyol component. This must be stirred thoroughly for a minimum of two hours to allow the Purmol to adsorb all the water before addition of the isocyanate.