PURMOL™ 3ST

PURMOL™ 3ST is a potassium (K) type A zeolite with a pore size of approximately 3 Angstroms (0.32 nm). Purmol 3ST is recommended for use with high quality coatings. In general, we recommend the addition of 2.5% - 5% Purmol powder to the polyol component. This must be stirred thoroughly for a minimum of two hours to allow the Purmol to adsorb all the water before addition of the isocyanate.

Principal: Zeochem LLC

Functions: Moisture Scavenger, Moisture Scavenger

Chemical Family: Zeolites

End Uses: 1K (1 Component) Adhesive, 1K (1 Component) Sealant, 1K (1 component) Coating, 2K (2 Component) Adhesive, 2K (2 Component) Sealant, 2K (2 component) Coating, Aluminium Pigmented Coatings, Floor Coatings, Foams, Metallic Pigment Coating, Polyurethanes, Protective Coatings, Zinc Primer

Labeling Claims: Conflict Minerals-free

Features: Excellent Dispersibility

Enhanced TDS

Identification & Functionality

CASE Ingredients Functions
Chemical Family
Plastics & Elastomers Functions
Product Code
MITM14957
Technologies
Product Families

Features & Benefits

CASE Ingredients Features
Labeling Claims
Materials Features
Additional Information

PURMOL™ adsorbents are synthetic zeolites in powder form with a complex alkali aluminosilicate structure. This structure is very open in nature and contains pores of a regular and precisely defined size. This allows for a selective adsorption of molecules based on molecular size and polarity. PURMOL™ adsorbs small, polar molecules, while excluding large organic molecules. In practice, PURMOL™ adsorbs water, but not solvents, resins, etc. PURMOL™ is an excellent moisture scavenger for polyurethanes, zinc rich primers, aluminum-pigmented coatings, and polysulfide systems

Applications & Uses

Adhesive & Sealant End Applications
Applicable Processes
Coating End Applications
Compatible Substrates & Surfaces
Plastics & Elastomers End Uses
Markets
Applications
Product Uses

PURMOL™ 3ST is recommended for use with high quality coatings. In general, we recommend the addition of 2.5% - 5% PURMOL™ powder to the polyol component. This must be stirred thoroughly for a minimum of two hours to allow the PURMOL™ to adsorb all the water before addition of the isocyanate.

Properties

Physical Form

Packaging & Availability

Principal Information

Group Principal Number
S002685
Principal

Storage & Handling

Storage Conditions

When stored unopened in original packaging in cool, dry conditions, PURMOL™ 3ST has a shelf life of three years.

Other

ADR/RID/ADN Proper Shipping Name
Not Applicable
ADR/RID/ADN UN Number
Not Applicable
Flammable Nature (SDS)
Non - combustible
IATA/ICAO Proper Shipping Name
Not Applicable
IATA/ICAO UN Number
Not Applicable
IMO/IMDG Proper Shipping Name
Not Applicable
IMO/IMDG UN Number
Not Applicable
Item Number
Odor (SDS)
Odorless
Other Hazards
The activated product generates much heat in contact with water.
USA/DOT Proper Shipping Name
Not Applicable
USA/DOT UN Number
Not Applicable
Chemical Properties
ValueUnitsTest Method / Conditions
pHmax. 11.5-EN ISO 787-9 10% w/w
Shelf Life & Stability
ValueUnitsTest Method / Conditions
Shelf Life3.0 yryr
Physical Properties
ValueUnitsTest Method / Conditions
Particle Sizemax. 30.0 µmµmEN ISO 1524 points
Particle Sizemax. 20.0 µmµmEN ISO 1524 scratches
Application Information
ValueUnitsTest Method / Conditions
Dosage (Use Level)2.5-5.0 %%
SDS Physical and Chemical Properties
ValueUnitsTest Method / Conditions
Melting Point (SDS)min. 1600.0 °C°C
Vapor Pressure (SDS)32.0 hPahPaAt 25°C
pH (SDS)9.0-11.5-5% in Water