Products

ACRYSOL™ RM-8W Rheology Modifier is a solvent-free, nonionic, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier that offers excellent flow and leveling, uniform film formation, gloss development and high thickening efficiency in interior and exterior latex paints. It can be used in combination with a high-shear builder such as ACRYSOL RM-3000 Rheology Modifier to reach a desired balance of high and low shear viscosity in flat through gloss formulations.

LOCTITE EDAG 154 E&C is a binder and resin used in the paints and coatings market.

D.E.H.® 488 Epoxy Curing Agent is a low viscosity, modified cycloaliphatic polyamine based, curing agent for epoxy resins.

CYCAT® 296-9 is an unique acid catalyst developed to accelerate the cure of Cymel amino resins at normal baking temperatures, and to permit the cure of clear finishes and enamels within relatively low temperature ranges.

POLYGLYKOL P 41/3000 is used as a humectant, plasticizer, and solvent in case ingredients. In fluids and lubricants, it functions as a lubricating agent and thickener. It also serves as a crosslinking agent, humectant, and solvent in industrial additives, and as a lubricant (external), mold release agent, and release agent in plastics and elastomers.

CYMEL® NF 3030 Resin is a formaldehyde-free crosslinking agent supplied in water. It was designed primarily for use in 2 component, ambient or forced cure, water-borne conversion varnishes for industrial wood when formulated with VIACRYL® SC 6834w/42WA amine-free acrylic emulsion. Resulting formulas exhibit superior catalyzed pot life relative to isocyanate-based conversion varnishes. The resulting coatings have excellent appearance, early hardness, resistance properties, and hot/cold cycle flexibility.

TEGO® DISPers 747 W is an anionic wetting and dispersing additive for water borne architectural formulations. Wets and stabilizes iron oxides with very effective viscosity reduction.Enables high pigment loadings with inorganic pigments and is able to stabilize organic pigments. As a dispersant in base paints, it shows excellent color acceptance.

ADDID® 900 is an adhesion promoter for solvent-borne and waterborne primers and coating formulations. It is based on an amino-functional silane.

Dynasylan® 2101 is a 100% active ureidosilane. It contains no organic tin compounds and no toxic carbamates above the declaration limit.

Bermocoll® Prime 2500 is a non-ionic, water soluble cellulose ether with enhanced enzymatic resistance, and superior colour stability. It improves the consistency, the stability, and the water retention of water based paints.

TEGO® DISPers 752 W is an anionic wetting and dispersing additive for transparent iron oxides and transparent titanium dioxide in waterborne formulations. Provides outstanding transparency, high pigment loadings, and long-term stability, especially when used in binder-free dispersions.

SURFYNOL® 465 is a good substrate wetting agent with verygood solubility in aqueous systems. It is suitable for waterborne coatings and inks.

Bermocoll® EBM 5500 is a non-ionic, water soluble cellulose ether with enhanced enzyme resistance. It improves the consistency, the stability, and the water retention of water based products.

ZHENGDA® ZM-1207 is a monoamine based on a copolymer backbone. ZHENGDA® ZM-1207 polyetheramine is a monofunctional, primary amine with an average molecular weight of about 2,000. The propylene oxide/ethylene oxide (PO/EO) mol ratio is 10/31.

Bermocoll® Prime 1500 is a non-ionic, water soluble cellulose ether with enhanced enzymatic resistance. and superior color stability. It improves the consistency, the stability, and the water retention of water based paints.