Enhanced TDS
Identification & Functionality
- CASE Ingredients Functions
- Chemical Family
- Product Code
- MITM12813
- Technologies
- Product Families
- Chemical Structure
Features & Benefits
- Product Benefits
- Surfactant properties to modify a variety of resin types
- Water soluble
Applications & Uses
- Adhesive & Sealant End Applications
- Product Applications
- Formulating emulsifiers, pressure sensitive adhesives, and corrosion inhibitors
- Reactive dispersant
Properties
- Physical Form
- Soluble In
Regulatory & Compliance
- Contains any chemicals listed on Prop 65 (including impurities, residues, catalysts, monomers, and by-products and excluding heavy metals)?
Packaging & Availability
Principal Information
- Group Principal Number
- S002219
- Principal
Storage & Handling
- Handling Information
At temperatures of 75-100°F (24-38°C) Tanks, Lines, valves Carbon steel Pumps Carbon steel Heat exchange surfaces Stainless steel Hoses Stainless steel, polyethylene, polypropylene, and TEFLON®
Gaskets, packing Polypropylene or TEFLON® (elastomers such as neoprene, Buna N, and VITON® should be avoided)
Atmosphere Nitrogen or dry air At temperatures above 100°F (38°C) Tanks Stainless steel or aluminum Lines, Valves Stainless steel Pumps Stainless steel or Carpenter 20 equivalent Atmosphere Nitrogen - ZHENGDA® ZM-1207 Amine-terminated Polyether may be stored under air at ambient temperatures for extended periods.A nitrogen blanket is suggested for all storage, however, to reduce the effect of accidental exposure to high temperatures and to reduce the absorption of atmospheric moisture and carbon dioxide. It should be noted that pronounced discoloration is likely to occur at temperatures above 140°F (60°C), whatever the gaseous pad.
- Cleanout of lines and equipment containing ZHENGDA® ZM-1207 Amine-terminated Polyether can be accomplished using warm water and steam. In the event of spillage of this product, the area may be flushed with water. The proper method for disposal of waste material is by incineration with strict observance of all federal, state, and local regulations.
Other
- Appearance
- Colorless to pale yellow liquid with slight haze permitted
- Appearance (SDS)
- Liquid
- Color (SDS)
- Colorless
- Item Number
- Odor (SDS)
- Amine - like
- Other Hazards
- None known
- USA/DOT UN Number
- Not Applicable
- Optical Properties
Value Units Test Method / Conditions Color Scale max. 75.0 Pt-Co - Chemical Properties
Value Units Test Method / Conditions Amine Hydrogen Equivalent Weight 1040.0 g/eq Free Amine Content min. 0.45 meq/g pH 11.0 - - Physical Properties
Value Units Test Method / Conditions Density 8.92 lb/gal At 25°C Flash Point 243.0 °C Pensky-Martens Closed Cup (PMCC) Melting Point 17.0 °C Viscosity 186.0 cSt at 37.8°C - Material Composition
Value Units Test Method / Conditions Acetylatables Content 0.48-0.52 meq/g - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Flash Point (SDS) 243.0 °C Closed Cup Kinematic Viscosity (SDS) 186.0 mm²/s At 37.8°C Melting Point (SDS) 17.0 °C Relative Density (SDS) 1.08 - Vapor Pressure (SDS) max. 0.1333 hPa At 20°C pH (SDS) 10.9 -