Products

AEROSIL® R 805 Coating is a fumed silica after-treated with organosilane. It providesutmost transparency.

CRAYVALLAC® PC is a micronised hydrogenated castor oil derivative surface enhancing additive for powder coatings based on PRIMID, hybrid and TGIC technologies. CRAYVALLAC® PC is easily incorporated using conventional pre-mixing techniques prior to extrusion. The use of CRAYVALLAC® PC leads to a substantial improvement in the appearance of the final cured powder coating. This improvement is due to CRAYVALLAC® PC enhancing the flow, levelling and degassing processes during cure. This is the result of CRAYVALLAC® PC greatly reducing the melt viscosity during this critical levelling stage in the cure cycle. This viscosity reduction also enhances the performance of other additives such as acrylic levelling agents and the degassing agent benzoin. CRAYVALLAC® PC works well in both clear and pigmented powder coating systems based on PRIMID, Hybrid and TGIC technologies.

SURFYNOL® SEis a multi-functional additive that combines excellent wetting properties with very good foam control in water borne coatings and inks. It is a self-emulsified surfactant that provides ease of incorporation.

Rostabil DDPP is an antioxidant and thermal stabilizer used in lubricants and functional fluids, paints and coatings, and plastics and elastomers. It functions as a heat stabilizer and general stabilizer.

AEROSIL® R 711 is a fumed silica aftertreated with a methacrylsilane.

ACRYSOL™ RM-725 Rheology Modifier is a solvent-free, hydrophobically modified ethylene oxide urethane (HEUR) based on proprietary technology for an excellent balance of properties. ACRYSOL™ RM-725 Rheology Modifier is designed as a universal, efficient mid shear viscosity builder with all binder types that are used for interior wall paints as well as exterior systems for wood, trim stains and masonry. This KU-building associative thickener offers formulators an excellent balance of sag resistance and leveling, including PVA and VAE binder based paints. ACRYSOL™ RM-725 Rheology Modifier also contributes significant to high shear viscosity, allowing the reduction of ICI builder use level in the paint.

ACRYSOL™ TT-935 Rheology Modifier is an alkali-soluble, anionic associative thickener, designed to give medium-shear-rate viscosity in interior/exterior flat latex paints. ACRYSOL™ TT-935 Rheology Modifier can be used as either a primary or co-thickener in water-based coatings. It offers excellent resistance to roller spattering with better film build and leveling than conventional thickeners. Paints formulated with ACRYSOL™ TT-935 Rheology Modifier as a sole thickener exhibit improved flow and leveling compared with medium- to high-molecular-weight cellulosic thickeners. The rheology can be modified to further improve flow and leveling by addition of low levels of surfactant or glycol-ether-type co-solvents to reduce the low-shear viscosity. Addition of some pre-dispersed colorant may also have this effect. ACRYSOL™ TT-935 Rheology Modifier is recommended for interior paints requiring improved flow and leveling and lower raw material cost compared to cellulosic thickeners. Where superior water resistance is required, we recommend ACRYSOL™ SCT-275 Rheology Modifier. ACRYSOL™ TT-935 can be used in exterior paints, but formulators should exercise caution to minimize potential blistering due to the anionic nature of this product. Delivered as a low-viscosity liquid, it is very easy to handle and incorporate into paint. It is resistant to microbiological degradation, thereby avoiding viscosity loss in paint, a common problem for manufacturers.

AEROSIL® R 974 W is a hydrophobic fumed silica after treated with DDS (Dimethyldichlorosilane) based on a hydrophilic fumed silica with a specific surface area of 200m²/g. The product thickening efficiency of AEROSIL® R 974 W ex RHE is consistent with the Waterford-produced AEROSIL® R 974. This profile is different than the thickening profile of standard RHE quality.

Hostavin® 3058 liq is a non-basic low molecular weight hindered amine light stabilizer (HALS), 100% liquid, characterized by its excellent solubility, broad compatibility in all kind of liquid paints, with low volatility and excellent stabilization efficiency.

Castorwax® is a wax like compound obtained by the controlled hydrogenation of pure castor oil. The principle constituent is glycerol tri-(12-hydroxystearate), also known as opalwax. Castorwax® is a hard, brittle, high melting point wax that is insoluble in most organic solvents but is highly compatible with most resins and waxes.

ACRYSOL™ SCT-275 Rheology Modifier is an efficient nonionic polyethylene oxide(HEUR) associative rheology modifier which can impart excellent rheological properties including flow and leveling, uniform film formation and film build, to latex based coatings. ACRYSOL™ SCT-275 Rheology Modifier is recommended for use in flat to semigloss paints and primers for both exterior paints and premium interior paints.It is especially suited to replace or be blended with conventional cellulosic thickeners where improved flow and leveling, increased hiding, and spatter resistance is desired. ACRYSOL™ SCT-275 Rheology Modifier is particularly suited for low solids, vinyl acrylic formulations where it yields excellent flow/sag balance, color acceptance, and syneresis resistance. ACRYSOL™ SCT-275 Rheology Modifier is supplied as a low viscosity liquid that is easy to handle and incorporate in the paint making process.

Bermocoll® EHM EXTRA is an associative non-ionic, water-soluble cellulose ether that improves the rheological properties of water-based paints.

AEROSIL® R 974 Silicas is a hydrophobic fumed silica aftertreated with DDS (Dimethyldichlorosilane) based on a hydrophilic fumed silica with a specific surface area of 200 m²/g.

Polycin® 12 is a 100% solids castor oil based reactive diluent having good compatibility and wetting. This polyol is a tetrahydroxy ester, with primary and secondary hydroxyl groups, making it an attractive material for chemical reactions.

BS-1C-A7 is an organoclay for solvent-based systems of medium-high polarity.