Products

HFGEL 120-B12 is an organophilic clay designed for use in aromatic and polar systems such as those containing aromatic hydrocarbons, alcohols, ketones, glycol ethers, and esters. It does not require use of a chemical activator to reach optimal efficiency. HFGEL 120-B12 can be incorporated at any point in the manufacturing process using common processing equipment. HFGEL 120-B12 provides stable rheology and helps control sag and pigment settling.

AEROSIL® R 974 Coating is a hydrophobicfumed silica after-treated with DDS (dimethyldichlorosilane).

TEGO® Powder AID F05 is a hydrophobic fumed silica. It provides good free flow ability for powder coatings.

AEROSIL® R 972 RHE SILICA is a fumed silica after-treated with DDS (dimethyldichlorosilane). It is easy to disperseand suitable for a broad range of applications.

TEGO® Glide 494 is a flow promoter and slip agent used in architectural coatings, furniture coatings, industrial applications, and wood coatings and finishes.

SURFYNOL® 118 is a very compatible, formulated molecular defoamer/deaerator based on Gemini surfactant technology. It can be used for a wide variety of applications where pinhole elimination, macro-, and micro-foam control is needed without causing any film defects.

Bermocoll® EM 7000 FQ is a non-ionic, water soluble cellulose ether. It improves the consistency, the stability, and the water retention of water-based products.

TEGO® ViscoPlus 3060 is a pH-independent, associative thickener with strongly pseudoplastic flow behavior.

ACRYSOL™ RM-8W Rheology Modifier is a solvent-free, nonionic, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier that offers excellent flow and leveling, uniform film formation, gloss development and high thickening efficiency in interior and exterior latex paints. It can be used in combination with a high-shear builder such as ACRYSOL RM-3000 Rheology Modifier to reach a desired balance of high and low shear viscosity in flat through gloss formulations.

AEROSIL® R 711 is a fumed silica aftertreated with a methacrylsilane.

CRAYVALLAC® PA3 WDA 20 is a pre-activated amide wax supplied in a mixture of mineral spirit (D60) and alcohols. Under paste form for post-addition to solvent-based low polarity coating systems, it provides a shear-thinning rheology with thixotropic viscosity recovery to coating formulations. In coating systems, its crystalline fibres form an interacting network which gives rise to the shear-thinning rheology of the final coating. It provides a very high viscosity under the low shear rates associated with sedimentation, and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application. Immediately following application, the coating’s viscosity undergoes a time dependent recovery as the network re-establishes itself. This time dependence is known as thixotropy and enables the final coating to attain very good levelling.

Rostabil DDPP is an antioxidant and thermal stabilizer used in lubricants and functional fluids, paints and coatings, and plastics and elastomers. It functions as a heat stabilizer and general stabilizer.

Aluminum Stearate 1032 is a medium bulk density, white powder.

AEROSIL® R 805 Coating is a fumed silica after-treated with organosilane. It providesutmost transparency.

CRAYVALLAC® PC is a micronised hydrogenated castor oil derivative surface enhancing additive for powder coatings based on PRIMID, hybrid and TGIC technologies. CRAYVALLAC® PC is easily incorporated using conventional pre-mixing techniques prior to extrusion. The use of CRAYVALLAC® PC leads to a substantial improvement in the appearance of the final cured powder coating. This improvement is due to CRAYVALLAC® PC enhancing the flow, levelling and degassing processes during cure. This is the result of CRAYVALLAC® PC greatly reducing the melt viscosity during this critical levelling stage in the cure cycle. This viscosity reduction also enhances the performance of other additives such as acrylic levelling agents and the degassing agent benzoin. CRAYVALLAC® PC works well in both clear and pigmented powder coating systems based on PRIMID, Hybrid and TGIC technologies.